October 2014 - ntg-context - NTG Mailing Lists

new mp feature: eofill
by Hans Hagen 18 Oct '14

18 Oct '14

\starttext \startMPpage fill fullcircle scaled 10cm -- fullcircle scaled 8cm -- fullcircle scaled 4cm -- cycle withcolor red/4 withtransparency (1,.5) ; currentpicture := currentpicture shifted (-5cm,0) ; fill fullcircle scaled 10cm -- reverse fullcircle scaled 8cm -- reverse fullcircle scaled 4cm -- cycle withcolor green/4 withtransparency (1,.5) ; currentpicture := currentpicture shifted (-5cm,0) ; eofill fullcircle scaled 10cm -- fullcircle scaled 8cm -- fullcircle scaled 4cm -- cycle withcolor blue/4 withtransparency (1,.5) ; currentpicture := currentpicture shifted (-5cm,0) ; \stopMPpage \stoptext -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

1 0

Re: [NTG-context] ntg-context Digest, Vol 124, Issue 35
by Stuart Hungerford 17 Oct '14

17 Oct '14

On Thu, Oct 16, 2014 at 10:35 PM, <ntg-context-request(a)ntg.nl> wrote: > \framed > [offset=overlay,width=4cm,height=4cm] > {\externalfigure[t:/sources/cow.pdf][factor=max]} > > \framed > [offset=overlay,width=4cm,height=6cm] > {\externalfigure[t:/sources/cow.pdf][factor=max]} > > \framed > [offset=overlay,width=6cm,height=4cm] > {\externalfigure[t:/sources/cow.pdf][factor=max]} > > \stoptext > > >> This works well, but what I'd like to do is choose a fixed size frame >> for each PDF and have ConTeXt fill the frame in the same way as these >> CSS commands: >> >> object-fit : cover; >> object-position : top left; >> overflow : hidden; [Forgot to add: this is with the ConTeXt bundled in Tex Live 2014] Many thanks -- although I don't see the effect I'm trying to get. In the code below the cow picture should fill the three frames at three different scales with no white bars between the frame and the externalfigure frame: \setupexternalfigures[location={default}] \starttext \framed [offset=overlay,width=10cm,height=2cm] {\externalfigure[cow][frame=on,factor=max]} \framed [offset=overlay,width=4cm,height=8cm] {\externalfigure[cow][frame=on,factor=max]} \framed [offset=overlay,width=6cm,height=6cm] {\externalfigure[cow][frame=on,factor=max]} \stoptext Stu

1 0

Prevent page break in middle of paragraph
by Ben Moon 17 Oct '14

17 Oct '14

Hi, I'm trying to get a thesis in a final shape and encounter a page break ("... Über 70 % der pagebreak") in the middle of a paragraph where there still seems to be plenty of space to finish that paragraph. If I add a few lines to the text it works ok. Also "\page[no]" doesn't work or "\vbox" and "\setpenalties\widowpenalties{100}\maxdimen" I couldn't get working neither. Though the last one got closest. Here's the minimal example I could come up with, sorry for it beeing a bit lengthy: %%%%%%%%%%%%%% \installlanguage[german][de] \mainlanguage[de] \setuppapersize[A4][A4] \setuplayout[reset] \setuplayout[ location=doublesided, top=20mm, % 20 topspace=30mm, % 20 bottom=20mm, % 20 %bottomdistance=0mm, backspace=30mm, leftmargin=30mm, leftmargindistance=0mm, rightmargin=30mm, % 25 rightmargindistance=0mm, header=2\bodyfontsize, headerdistance=\bodyfontsize, footer=2\bodyfontsize, footerdistance=\bodyfontsize, height=fit, width=fit, % grid=yes ] \setuppagenumbering[ way=bytext, partnumber=no, alternative=doublesided, location=right, style=\sl ] \setupindenting[medium,yes] \setupcaption[table][headstyle=normal, location=top, stopper={.}, width=\makeupwidth, style={\switchtobodyfont[11pt]}] \setuphead[section][style=\bfb] \setuphead[subsection][style=\bfa] \setupheads[indentnext=yes] \setupfloats[indentnext=yes] \setupheadertexts[][{\sl\getmarking[section]}][{\sl \getmarking[chapter]}][] \setupbackgrounds[header][text][bottomframe=on] \setupbackgrounds[footer][text][topframe=on] \starttext \setupinterlinespace[big] pT--Klassifikation teilte sich wie folgt auf: pTis 13 (3,5\,\%), pT1 238 (64,2\,\%), pT2 114 (30,7\,\%) und pT3 6 (1,6\,\%) Fälle. Es handelte sich in 287 Fällen (77,4\,\%) um ein ductal invasives, in 41 (11,1\,\%) um ein lobulär invasives, in 6 (1,6\,\%) um ein gemischtes und in 24 Fällen (6,5\,\%) um ein Mammakarzinom anderer Art. Ein Ductales Carcinoma in situ fand sich in 13 Fällen (3,5\,\%) (Tabelle \in[tab:Pat-Charakt]). Hier wurde die SLNB nur im Rahmen einer Mastektomie durchgeführt. Da in Deutschland bei klinisch unauffälliger Axilla die Wächterlymphknotentechnik Methode der Wahl ist \cite[Kuehn2005]{}, keine nationale Leitlinie über ein exaktes und standardisiertes Markierungsprotokoll existiert und den Patientinnen durch die retrospektive Analyse keine Unannehmlichkeiten entstanden sind bzw. sie keinen Schaden erlitten haben, konnte auf eine Genehmigung durch die Ethikkommission verzichtet werden. \placetable[here][tab:Pat-Charakt]{Tabellarische Zusammenfassung der in der vorliegenden Studie zusammengeführten, wichtigsten Patientencharakteristika.} { \setupTABLE[c][1][width=5em] \setupTABLE[c][2][width=8em] \setupTABLE[c][3][align=center] \setupTABLE[frame=off] \setupTABLE[r][1,4,7,10,15,21,24][bottomframe=on] \bTABLE \bTR\bTD[nc=2] Geschlecht (\Sigma=371) \eTD\bTD \eTD \eTR \bTR\bTD \eTD\bTD Frauen \eTD\bTD 368 \eTD \eTR \bTR\bTD \eTD\bTD Männer \eTD \bTD 3 \eTD \eTR \bTR\bTD[nc=2] Alter (Jahre)\eTD \eTR \bTR\bTD \eTD\bTD Median\eTD \bTD 60,4 \eTD \eTR \bTR\bTD \eTD\bTD Bereich\eTD \bTD 25,3\,--\,86,5\eTD \eTR \bTR\bTD[nc=2] Tumorgröße (mm) \eTD \eTR \bTR\bTD \eTD\bTD Median\eTD \bTD 16 \eTD \eTR \bTR\bTD \eTD\bTD Bereich\eTD \bTD 0,9\,--\,140 \eTD \eTR \bTR\bTD[nc=2] pT Klassifizierung \eTD \eTR \bTR\bTD \eTD\bTD pTis\eTD \bTD 13 (3,5\,\%) \eTD \eTR \bTR\bTD \eTD\bTD pT1\eTD \bTD 238 (64,2\,\%) \eTD \eTR \bTR\bTD \eTD\bTD pT2\eTD \bTD 114 (30,7\,\%) \eTD \eTR \bTR\bTD \eTD\bTD pT3\eTD \bTD 6 (1,6\,\%) \eTD \eTR \bTR\bTD[nc=2] Histologie\eTD \eTR \bTR\bTD \eTD\bTD ductal invasiv\eTD \bTD 287 (77,4\,\%) \eTD \eTR \bTR\bTD \eTD\bTD lobulär invasiv\eTD \bTD 41 (11,1\,\%) \eTD \eTR \bTR\bTD \eTD\bTD kombiniert\eTD \bTD 6 (1.6\,\%) \eTD \eTR \bTR\bTD \eTD\bTD DCIS\eTD \bTD 13 (3,5\,\%) \eTD \eTR \bTR\bTD \eTD\bTD andere\eTD \bTD 24 (6,5\,\%) \eTD \eTR \eTABLE } \section{Markierungstechnik} Ein Radiologe mit über 30 Jahren Expertise in der interstitiellen peritumoralen Lymphszintigraphie und der Funktionslymphszintigraphie führte die SN--Markierung am Vortag etwa 20 Stunden vor der Operation durch. Durch diesen Zeitabstand war eine ausreichende Möglichkeit für Spätaufnahmen gegeben. \subsection{Applizierter Tracer} {Im Laufe der Untersuchungen kamen drei verschiedene Tracer, von drei unterschiedlichen Herstellern zur Verwendung: {\it Nanocoll\high{®}} (GE Healthcare Buchler, Braunschweig, Deutschland), {\it Nano--Albumon\high{®}} (Medi--Radiopharma Ltd., Budapest, Ung\-arn), sowie {\it Nanocis\high{®}} (CIS bio, Berlin, Deutschland). Bei {\it Nanocoll\high{®}} und {\it Nano--Albumon\high{®}} handelt es sich um ein Natrium--(\high{99m}Tc)--Technetium--Pertechnetat markiertes Humanserum--Albumin--Nanokolloid. {\it Nanocis\high{®}} demgegenüber ist ein kolloidales (\high{99m}Tc)--Tech\-netium--Rheniumsulfid. Die Verwendung von Tracern unterschiedlicher Hersteller war lediglich durch die lokale und momentane Verfügbarkeit begründet. Gemäß Herstellerangaben liegt bei {\it Nanocoll\high{®}} die Teilchengröße zu 95\,\% im Bereich unter 80\,nm, zu 4\,\% zwischen 80 und 100\,nm und bei 1\,\% über 100\,nm. Über 70\,\% der {\it Nanocis\high{®}}--Partikel haben eine Größe zwischen 31,6 und 178\,nm, davon 20\,\% unter 100\,nm. Die Partikelgröße von {\it Nano--Albumon\high{®}} liegt zu 80\,\% unter 100\,nm.} \subsection{Tracerapplikation} Die Patientin wurde in ca. 30° Neigung zur kontralateralen Seite der betroffenen Brust gelagert. Es wurde ein Depot des momentan verfügbaren Radiopharmakons langsam, intradermal am periareolären Rand des betroffenen Quadranten gesetzt (Abbildung \in[fig:Tracer]). Die Injektionsnadel wurde so positioniert, dass die Nadelspitze vor Beginn der Injektion grau durch die Haut schimmerte und sich mit beginnender Injektion unmittelbar eine Quaddel bildete. Bei Schmerzen wurde kurz pausiert. \stoptext %%%%%%%%%%%%%% The context version I'm using is the current debian installation in the unstable branch: context --version mtx-context | ConTeXt Process Management 0.60 mtx-context | mtx-context | main context file: /usr/share/texmf/tex/context/base/context.mkiv mtx-context | current version: 2014.05.21 22:04 Help is much appreciated Thanks very much in advance Ben

3 3

sidefloats
by Hans Hagen 17 Oct '14

17 Oct '14

new in next beta: \starttext \placefigure [left] {} {\framed[height=1cm,width=2cm]{}} \input tufte \doifelsesidefloat {\dontleavehmode{\bf OKAY}: HERE} {\inmargin{OKAY} HERE} \placefigure [left] {} {\framed[height=10cm,width=2cm]{}} \input tufte \doifelsesidefloat {\dontleavehmode{\bf OKAY}: HERE} {\inmargin{OKAY} HERE} \stoptext -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

2 1

slightly-OT: Adobe records your every move!
by Alan BRASLAU 17 Oct '14

17 Oct '14

E-book specialists, beware: http://arstechnica.com/security/2014/10/adobes-e-book-reader-sends-your-rea… Alan

2 3

\setupformulas and \frac give small symbols
by Mikael P. Sundqvist 16 Oct '14

16 Oct '14

Hi, with a standalone installation updated today, I get smaller letters in \frac if \setupformulas[align=flushleft] is applied. The test file below generates the attached pdf. /Mikael \starttext \startformula z=\frac{x}{y} \stopformula \setupformulas[align=flushleft] \startformula z=\frac{x}{y} \stopformula \stoptext

3 4

math snapping
by Hans Hagen 16 Oct '14

16 Oct '14

Hi, new experimental feature in next beta \enabletrackers[math.openedup] \starttext \dorecurse{10}{\dorecurse{#1}{whatever }} \startitemize[packed] \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \stopitemize \startitemize[packed,columns] \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \stopitemize \dorecurse{5}{\dorecurse{#1}{whatever }\openedupimath{\frac{1}{2}} } \startitemize[packed,columns] \startitem whatever \openedupimath{1+2} whatever \startitem whatever \openedupimath{1+2} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{1+2} whatever \startitem whatever \openedupimath{1+2} whatever \stopitemize \dorecurse{5}{\dorecurse{#1}{whatever }\openedupimath{1+2} } \startitemize[packed] \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \stopitemize \dorecurse{10}{whatever } \dorecurse {5}{\dorecurse{#1}{whatever }\openedupimath{\frac{1}{2}} } \dorecurse{10}{whatever } \stoptext -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

2 4

Metapost/Metafun: textext
by Willi Egger 15 Oct '14

15 Oct '14

Hi all, In the course of a project I wanted to create a decorative border around a framed text. The border should be built from chosen glyphs which are placed along the border as pictures. For this purpose the textext macro is a good candidate. However I run into troubles. With help from Hans, a solution could be found. Hans, thank you so much! I have created a section on the wiki, where the problem is shown and the solution is given. In order to illustrate the whole thing I placed also a full example. http://wiki.contextgarden.net/MetaPost#Repetition_of_a_Text_Element_to_Fill… Kind regards Willi

1 0

Stopper and itemize
by Fabrice Couvreur 15 Oct '14

15 Oct '14

hi, In the following code, the default stopper is the point. \starttext \startitemize[columns,a,joinedup] \item $f(0)$ \item $g(0,3)$ \item $f(\sqrt 2)$ \item $g(-4)$ \stopitemize \stoptext How to have a break ? Best regards, Fabrice

4 4

Re: [NTG-context] (MKIV beta) APA citations: "et al." incorrectly written
by Robert Blackstone 15 Oct '14

15 Oct '14

On 6 Oct 2014, at 23:33 , Sander Maijers <s.n.maijers(a)gmail.com> wrote: > Who can offer a short-term solution to this problem? All I want is to > reference a work, listing all of the authors' names, in APA6 format. If > necessary I'll prescribe the output format manually. > > Best, > > Sander Maijers > >>> >>> \setupbibtex[database={references/bibliographic_database},sort=author] >>>> \setuppublications[alternative=apa] >>>> >>>> \starttext >>>> \cite[extras={, p.~3}][Zhou2012] >>>> \cite[Zhou2012] >>>> \stoptext >>>> >>> >>> Incorrectly produces: >>> >>>> (Zhou et al., 2012, p. 3) (Zhou et al., 2012) >>>> >>> >>> Instead of: >>> >>>> (Zhou, Lyu, & King, 2012, p. 3) (Zhou, Lyu, & King, 2012) >>> >>> What I would do is, for the final processing, not to load the .bib-file but the .bbl that was generated in the previous run. You can open that file in any text processor (I mostly use TeXShop) and manually change the Author for this particular entry. In the .bbl the field Author has this form: \author[]{}[]{}{} . You should be able to solve your problem by putting inside the last pair of brackets exactly how you would like your authors et. al. to appear in your output. Place the whole lot again between brackets: \author[]{}[]{}{{Zhou, Tom Chao and Lyu, Michael R. and King, Irwin}} or whatever you want. But again, don’t input the bib-file. Every time you do that the old .bbl is overwritten and your correction will be lost. ConTeXt uses the .bbl, not the .bib. I hope this helps. Best regards, Robert Blackstone

3 3