December 2019 - ntg-context - NTG Mailing Lists

serial letters
by Henning Hraban Ramm 11 Nov '24

11 Nov '24

How would you approach serial letters, e.g. to all members of a club? (Actually I need to send out donation receipts.) I’d like to use the letter module, since my usual letter design is using it. I can export the addresses to CSV, JSON, Lua tables or whatever or transfer them to a SQLite db. Would it make more sense to read them in Lua and combine this data with a buffer, or to write a single tex file for every letter? I know how to do the latter, but I’d like to learn a more ConTeXt-ish way. Would it make sense to use the bibliographies module? Greetlings, Hraban --- https://www.fiee.net http://wiki.contextgarden.net https://www.dreiviertelhaus.de GPG Key ID 1C9B22FD

7 9

t-downsample.lua
by Peter Münster 17 Oct '24

17 Oct '24

Hi, Please find attached a new version of the module, with some ideas from Marco. Later, I'll upload it to modules.contextgarden.net. Here a usage example: \usemodule[downsample] \setupexternalfigures[ location=default, % find hacker.jpg and mill.png cache=/tmp, % where to put the low resolution images resolution=50, % resolution in DPI conversion=downsample.pdf] % use this module \starttext \externalfigure[hacker][width=0.4\textwidth] \setupexternalfigures[resolution=20] \externalfigure[mill][width=4in, height=3in] \setupexternalfigures[resolution=200] \externalfigure[mill][width=4in, height=3in] \stoptext Hans, it would be nice, to apply this patch, to trigger new conversion, when figure dimensions change: --- grph-inc.lua~ 2019-02-14 17:04:12.000000000 +0100 +++ grph-inc.lua 2019-02-17 08:45:38.129971581 +0100 @@ -864,6 +864,14 @@ newbase = prefix .. newbase end local hash = "" + local width = figures.current().request.width + local height = figures.current().request.height + if width then + hash = hash .. "[w:" .. width .. "]" + end + if height then + hash = hash .. "[h:" .. height .. "]" + end if resolution then hash = hash .. "[r:" .. resolution .. "]" end TIA, -- Peter

2 5

\type ignores space between command and bracket
by Wolfgang Schuster 02 Feb '24

02 Feb '24

Hi, in the following code example the result from \type lacks the space between \cmd and the following left bracket. \starttext \starttyping \cmd [...] \stoptyping \type{\cmd [...]} \stoptext Wolfgang

3 2

Laundry symbols (now: altered picture)
by Procházka Lukáš Ing. - Pontex s. r. o. 02 Jan '22

02 Jan '22

Hello ConTeXters, is there a way how to get laundry symbols into ConTeXt? - The image is copied from "The Comprehensive LATEX Symbol List", Scott Pakin. TIA. Best regards, Lukas -- Ing. Lukáš Procházka [mailto:LPr@pontex.cz] Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz] Bezová 1658 147 14 Praha 4 Tel: +420 244 062 238 Fax: +420 244 461 038

5 10

Undefined control sequence: \pdfpxdimen
by Aditya Mahajan 22 Jun '20

22 Jun '20

The drops module uses the primitive \pdfpxdimen in a couple of places, but that is no longer defined in the current beta. What is the equivalent command now? Examples of usage: \pdfpxdimen1in\relax\divide\pdfpxdimen\numexpr\dropsparameter\c! resolution\relax % set actual pixel dimension Aditya

3 6

Outputting custom types in MKiv bibliography
by Mike O'Connor 11 Mar '20

11 Mar '20

Hello, I’m trying to create my first publication using ConTeXt mkiv. All going well except for the bibliography formatting. Previously I have used LaTeX, standard entry types in BibTeX, and custom output formats using Biblatex. My publication cites lots of historical sources, viz.: (1) Newspaper articles — currently stored as ‘article’ types in BibTex. (2) Archival sources (historic letter, some leather-bound volume, a catalogued box of old photographs, etc.) — currently stored as ‘unpublished’ or ‘misc'. I would prefer to store these (in BibTeX, buffer, lua, or xml) as custom types (eg. ‘newspaper’, ‘archivalItem’), create setups for how they are output and which fields I output. I found a ’newspaper’ type (and other non-BibTeX types) defined in publ-imp-apa.mkiv as: \startsetups btx:apa:list:newspaper \fastsetup{btx:apa:list:article} \stopsetups I hoped this would mean I could output something: Boxing. (1903, September 13). The Sunday Times, p.8 However, if I create an item of type 'newspaper’ and \cite it I get an output of all stored fields: newspaper: [day: 13] [journal: {The Sunday Times}] [month: 09] [pages:8][title: {Boxing.}] [type: newspaper article] [year: 1903] A similar thing happens if I try to cite the standard BibTeX type ‘misc’. If I store the newspaper item as type ‘article’ I get: “Boxing.”, The Sunday Times, 8, 1903. (missing day and month) Is it relevant that there is a problem when I include \showbtxfields[rotation=30] in my document? The resulting table has ‘*’ for fields in ‘article’, ‘book’, ‘demo-a’, ‘demo-b’ but the columns for ‘newspaper’ and ‘misc’ are empty. Any pointers gratefully received. Cheers, Mike O’Connor P.S. I am working in TeXShop on OSX (10.11.3), and it reports: This is LuaTeX, Version beta-0.80.0 (TeX Live 2015) (rev 5238) ConTeXt ver: 2015.05.18 12:26 MKIV current fmt: 2016.3.19 int: english/english

4 5

body text invades space for notes
by Pablo Rodriguez 04 Mar '20

04 Mar '20

Dear list, I’m afraid to admit that ConTeXt notes are increasily problematic for me. I don’t think this is special to me and I hope we can discuss the general issue. Bottom notes are somewhat tricky in ConTeXt. The user expects that these notes (either footnotes, or linenotes) aren’t moved to the next page. I mean, no reader expects to find a full footnote in the next page from the one that calls it. (At least, I have never seen that in any book read or paged through.) There may be good reasons for that, but ConTeXt doesn’t enable this by default. Both options "split=verystrict" and "scope=text" have to be used in "\setupnote". This translated in wrong space before notes when paragraph form was used. I was very interested to use these (line)notes for critical editions, but sometimes the text run into the notes. I’m afraid that left linenotes extremely problematic to be used. With the arrival of LMTX, space before footnotes is more problematic than before. No paragraph notes, see the attached sample (wrong-6.png). In other cases, ConTeXt seems to ignore totally that the page bottom contains footnotes. I cannot provide minimal samples. Consider that if it were so easy to reproduce, problably the issue would have been gone long ago. Even when one avoids the problematic bottom partition (which I did in that case by removing the "before" option from "\setupnote[footnote]"), there is clearly an issue with the footnote having its space before remaining blank from the body text (wrong-2.png). My first question is why the bottom notes have problems to preserve the space before them (and simultaneously remain in the same page where they come from). This applies also for paragraph notes. My second question is what can be improved to achieve what may be considered as a basic typographic feature. Sorry for not providing more than output samples. Bear with me. I may not be an expert user, but I think I’m a frequent ConTeXt user. And I don’t think it is totally wrong to consider this a basic feature that needs to be improved. Many thanks for your help in advance, Pablo -- http://www.ousia.tk

3 6

Some questions regarding math typesetting
by TeXnician 29 Feb '20

29 Feb '20

Dear list, while doing some math typesetting, I have found the following features not working in LMTX: 1. Non-displaystyle operators are simply not shown (try \sum or \lim in text or scriptstyle). This works in MkIV (and iirc in LMTX versions from before november). 2. \underbrace{x}_{y} stopped working. It produces an underbrace but the subscript is not centered below the brace. It will show up as right subscript. This works in MkIV. 3. \startformulas does not allow numbering formulas because the number will run into the next column. I have posted this at https://tex.stackexchange.com/questions/518262/context-number-formulas-side… and Henri Menke tested that it broke in 2017. Aditya Mahajan mentioned that it is a bug. For the upper two cases: Is anything wrong with my LMTX installation or did I miss some upgrade instructions for math in LMTX? Many thanks for an answer.

3 3

Quotation dash issues with semantic markup
by Sam May 18 Jan '20

18 Jan '20

3 3

Line numbering in two column layout conflicts with marking
by Oliver von Criegern 07 Jan '20

07 Jan '20

Dear list members, line numbering in a two column layout apparently conflicts with the marking mechanism. Consider the following example: \setupcolumns[n=2] \setuplinenumbering [ step=5, method=page, align=flushright, ] \definemarking[Test] \setupheadertexts[{\fetchmark[Test][top] -- \fetchmark[Test][bottom]}] \startbuffer \dorecurse{12}{words } \stopbuffer \starttext \startcolumns \startlinenumbering \marking[Test]{ONE}ONE \dorecurse{12}{\getbuffer}\par \marking[Test]{TWO}TWO \dorecurse{29}{\getbuffer}\par \marking[Test]{THREE}THREE \dorecurse{12}{\getbuffer}\par \stoplinenumbering \stopcolumns \stoptext In the result, the header of the first page reads "ONE -- THREE", despite marking "THREE" being placed in the third line of the second page. Without linenumbering, the header of the first page reads "ONE -- TWO", as is to be expected. Best regards, Oliver -- Dr. Oliver von Criegern Referat für IT und Digital Humanities Bayerische Akademie der Wissenschaften Alfons-Goppel-Str. 11 80539 München Tel.: 089-23031-1310

3 5