- ntg-context - Mailing Lists

[ \startTEXpage with \strut ]
by vm 08 Dec '24

08 Dec '24

Trying to get a single page of a specific size, I set the width and height of \startTEXpage only to find out that a \strut as a last command before the \stopTEXpage, will expand the height. 8<---- \setuppapersize [A2] \starttext \startTEXpage[offset=0mm, width=220mm, height=110mm] MWE without \type{\strut} -> Landscape (220 × 110 mm) %MWE with \type{\strut} -> Landscape (220 × 111 mm) %\strut \stopTEXpage \stoptext --->8 There if probably a reason to it, so I'd like to know why it works as it does. .F

2 1

Roman numerals typography
by damien＠thiriet.web4me.fr 07 Dec '24

07 Dec '24

Hello, In French typography, roman numerals are usually typeset being connected with a top bar and a lower bar, at least when it comes to century numbers (should be also small caps, something I discovered today). Since I am not sure my vocabulary suits to this reality, you can see a sample looking at photos displayed in this online article https://fr.cultura10.com/r%C3%A8gles-d%27%C3%A9criture-des-nombres-romains/ I have been simulating this with kerning for several years, but I recently switched from Latin Modern Sans to Luciole (both 24pt) for my presentations and I have to redesign this issue. So it is a good opportunity to find some a better alternative than stuff like \def\III{{\rm I\kern -1.3pt I\kern -1.3pt I}}, working at the font level or with a ConTeXt built-in macro. Several questions: 1) Is this already implemented in ConTeXt (I don't have time to reinvent the wheel once more)? The sample I looked at in the \Romannumeral wiki page doesn't implement this, but they may be alternative I am not aware of. 2) If it isn't, I think the best way would be to add a font extension, using hits given by Hans in the 11th meeting proceedings. However, what would be the best idea: playing with kerning, or with ligatures? Thanks for your advices, Damien Thiriet

3 2

Rounded pens with Metapost
by Wolfgang Schuster 07 Dec '24

07 Dec '24

Hi, are there now better ways to create rounded pens without adding many support points? \starttext \startMPpage[offset=1dk] path Halfcircle ; Halfcircle = (1,0){up} for i = 1 upto 180 : .. ((1,0) rotated i) endfor -- cycle ; draw Halfcircle scaled 10 shifted (0,12) ; pen HalfcirclePen ; HalfcirclePen := makepen Halfcircle ; draw ((0,1) -- (1,1)) scaled 10 withpen HalfcirclePen ; draw ((0,0) -- (0,1)) scaled 10 withpen HalfcirclePen rotated 90 ; draw ((1,0) -- (1,1)) scaled 10 withpen HalfcirclePen rotated 270 ; draw ((0,0) -- (1,0)) scaled 10 withpen HalfcirclePen rotated 180 ; \stopMPpage \startMPpage[offset=1dk] path RoundedRectangle ; RoundedRectangle = (-1,0){up} for i = 180 step -1 until 89 : .. ((1,0) rotated i) endfor -- (1,1){down} for i = 360 step -1 until 269 : .. ((1,0) rotated i shifted (0,1)) endfor -- cycle ; draw RoundedRectangle scaled 10 shifted (0,12) ; pen RoundedRectanglePen ; RoundedRectanglePen := makepen RoundedRectangle ; draw ((1,0) -- (1,1)) scaled 10 withpen RoundedRectanglePen reflectedabout (up,down) rotated 270 ; draw ((0,0) -- (1,0)) scaled 10 withpen RoundedRectanglePen rotated 180 ; \stopMPpage \stoptext Wolfgang

3 3

OT: TrueType hinting with FontLab
by Henning Hraban Ramm 07 Dec '24

07 Dec '24

In case you’re interested in the inner workings of TrueType hinting (and its implementation in FontLab), have a look at this: https://github.com/jenskutilek/fakelab/blob/main/doc/truetype-hinting/index… HR

1 0

Transition from ConTeXt mark II to mark IV
by Michal Kvasnička 06 Dec '24

06 Dec '24

Hallo. I need some help. I have all my teaching materials (slides, worksheets, and everything, including many MetaPost figures) in ConTeXt mark II. After the transition to Ubuntu 24.10, I found that the texexec is not a part of the ConTeXt distribution anymore. I tried to compile my stuff with context instead and failed. This is probably because the macros in my old modules (created by myself many years ago) are not compatible with mark IV. Hence my question: Is there any document on the transition from mark II to mark IV? Many thanks for your kind help. Best wishes, Michal

3 3

Some questions about punctuation squeezing in Japanese
by ai2472206007＠yeah.net 04 Dec '24

04 Dec '24

hi,lists The punctuation of question marks, exclamation marks, and quotation marks doesn't seem to be very good at the moment. ipaexgothic font download : https://moji.or.jp/ipafont/ipaex00401/ %%%%%%%% \starttext \definedfont[name:ipaexgothic] \startscript[nihongo] \setbox0\hbox{% \framed[width=1em,height=.8em,depth=.2em,strut=no,framecolor=red]{}% \framed[width=1em,height=.8em,depth=.2em,strut=no,framecolor=red]{}% \framed[width=1em,height=.8em,depth=.2em,strut=no,framecolor=red]{}% \framed[width=1em,height=.8em,depth=.2em,strut=no,framecolor=red]{}% \framed[width=1em,height=.8em,depth=.2em,strut=no,framecolor=red]{}% \framed[width=1em,height=.8em,depth=.2em,strut=no,framecolor=red]{}% \framed[width=1em,height=.8em,depth=.2em,strut=no,framecolor=red]{}% \framed[width=1em,height=.8em,depth=.2em,strut=no,framecolor=red]{}% \framed[width=1em,height=.8em,depth=.2em,strut=no,framecolor=red]{}% \framed[width=1em,height=.8em,depth=.2em,strut=no,framecolor=red]{}% \framed[width=1em,height=.8em,depth=.2em,strut=no,framecolor=red]{}% \framed[width=1em,height=.8em,depth=.2em,strut=no,framecolor=red]{}% \framed[width=1em,height=.8em,depth=.2em,strut=no,framecolor=red]{}% \framed[width=1em,height=.8em,depth=.2em,strut=no,framecolor=red]{}% \framed[width=1em,height=.8em,depth=.2em,strut=no,framecolor=red]{}% \framed[width=1em,height=.8em,depth=.2em,strut=no,framecolor=red]{}% }\leavevmode\smash{\copy0}\hskip-16em（あ）。亂數：「假，文。」「亂數」 <== work well \leavevmode\smash{\copy0}\hskip-16em 亂數、「假文？」「亂數！」假文」。亂數 <== not good with {\red？」} and {\red！」}. \\ ==>{\red？} and {\red！} should be full-width with {\red」}. just like {\red ？{}｣} \leavevmode\smash{\copy0}\hskip-16em 亂數：“假文。”亂數：“假文？”亂數：“假文！” <== not good with {\red：“} and {\red。”} and {\red？”} and {\red！”}.\\ ==>{\red “ ”} should be half-width with {\red 。？！}. just like {\red「」} \leavevmode\smash{\copy0}\hskip-16em 「ちょっと」，“チェック”亂數・假文 <== not good with {\red ，“}. \\ ==>the space between {\red ，} and {\red “} should be half-width \stopscript \stoptext thanks for any help, autumnus

3 2

Hiding a part of a path
by Jeong Dal 02 Dec '24

02 Dec '24

Dear all, I’d like to hide a part of a path. I can do that after changing it into an image, but it is not clearly erased. Is there a way to do that not changing it into an image? Thank you for reading. Best regards, Dalyoung \startMPcode path p,q; picture pic; numeric u; u:= 1cm; p := origin--(2u,0)--(3u,u)--(3u,0)--(4u,0); q := (3u,u)--(3u,0); pic := image(draw p; draw q withcolor white;); draw pic; \stopMPcode

3 3

Metapost lines with fancy line endings and connections
by Wolfgang Schuster 01 Dec '24

01 Dec '24

Hi, I have a bunch of similar graphics on a 7x7 where some lines have exceptions for the endings and connections. - When a line ends in one of the four corners the line end has an angle of 45 degrees. - When a line takes a turn the outer corner results also in a 45 degree angle. - Single points always use straight endings. - Lines which end outside of a corner end with a straight line. While I can get the desired result which a filled path I'm looking for a solution where I have to set fewer control points. The example below shows the simpler draw alternative where I need only a start and end point versus the outline alternative where I need at least twice as many points to get the desired output. \starttext \startuseMPgraphic{draw} draw hlingrid(0, 7, 1, 7, 7) withpen pencircle scaled 1/20 shifted (0.5,0.5) withcolor "darkgray" ; draw vlingrid(0, 7, 1, 7, 7) withpen pencircle scaled 1/20 shifted (0.5,0.5) withcolor "darkgray" ; pickup pensquare scaled 1; drawoptions(withcolor "red"); draw (1,7) -- (7,7) ; draw (1,1) -- (3,1) -- (3,5) ; draw (7,3) -- (5,3) -- (5,5) -- (7,5) ; draw (7,1) ; \stopuseMPgraphic \startuseMPgraphic{fill} draw hlingrid(0, 7, 1, 7, 7) withpen pencircle scaled 1/20 withcolor "darkgray" ; draw vlingrid(0, 7, 1, 7, 7) withpen pencircle scaled 1/20 withcolor "darkgray" ; drawoptions(withcolor "green"); fill (0,6) -- (7,6) -- (6,7) -- (1,7) -- cycle ; fill (1,0) -- (2,0) -- (3,1) -- (3,5) -- (2,5) -- (2,1) -- (0,1) -- cycle ; fill (7,2) -- (5,2) -- (4,3) -- (4,4) -- (5,5) -- (7,5) -- (7,4) -- (5,4) -- (5,3) -- (7,3) -- cycle ; fill (6,0) -- (7,0) -- (7,1) -- (6,1) -- cycle ; \stopuseMPgraphic \startcombination[2*1] {\scale[s=10]{\useMPgraphic{draw}}}{draw option} {\scale[s=10]{\useMPgraphic{fill}}}{fill option} \stopcombination \startoverlay {\scale[s=10]{\useMPgraphic{draw}}} {\scale[s=10]{\useMPgraphic{fill}}} \stopoverlay \stoptext Wolfgang

5 8

Line break after a Metapost picture at start of paragraph
by Florent Michel 29 Nov '24

29 Nov '24

Hi, I have just encountered a (to me) slightly surprising behaviour in ConTeXt LMTX 2024.10.31: there seems to be an automatic line break after a Metapost picture if it is at the start of a paragraph. Here is a simple example showing this behaviour: ------------------------------------------------------------------ \starttext % Two different lines \startMPcode fill fullcircle scaled 10pt; \stopMPcode text % Single line text \startMPcode fill fullcircle scaled 10pt; \stopMPcode \stoptext ------------------------------------------------------------------ I'm not sure whether this is a bug or intended behaviour, though - maybe this is the expected output for users more familiar with TeX and/or ConTeXt than I am. I would have two question, though: 1) Is there a canonical way to get the second behaviour (multiple Metapost pictures and text on the same line) if the first Metapost picture starts the paragraph? One workaround seems to be to add \noindent (plus \hskip if I do want indentation) before the first Metapost picture, but maybe there is a better way. 2) If this is intended behaviour, is there already a description of it in the Wiki or would it make sense for me to add it? Cheers, Florent

2 2

"Missing number, case 7, treated as zero" error message.
by Jeong Dal 28 Nov '24

28 Nov '24

Dear lister, I have an error which I can not locate. Please help me what is wrong in the following example. Thanks for reading. Regards, Dalyoung \useMPlibrary[dum] \starttext \startplacefigure[location=,reference=fig:gateNOT,title=] \startcombination[nx=2,ny=1] {externalfigure[dummy][width=.25\textwidth]}{a} {externalfigure[dummy][width=.25\textwidth]}{b} \stopcombination \stopplacefigure \stoptext Log file: metapost > library 'dum' is loaded fonts > preloading latin modern fonts (second stage) fonts > 'fallback modern rm 12pt' is loaded tex error > tex error on line 5 in file /Users/graph/Library/Mobile Documents/com~apple~CloudDocs/Documents/test.tex: Missing number, case 7, treated as zero <to be read again> ] <line 3.5> {externalfigure[dummy][width=.25\textwidth] }{a} 1 \useMPlibrary[dum] 2 \starttext 3 \startplacefigure[location=,reference=fig:gateNOT,title=] 4 \startcombination[nx=2,ny=1] 5 >> {externalfigure[dummy][width=.25\textwidth]}{a} 6 {externalfigure[dummy][width=.25\textwidth]}{b} 7 \stopcombination 8 \stopplacefigure

3 2