- ntg-context - NTG Mailing Lists

Re: [NTG-context] Problem with \head inside \itemize
by Benjamin Buchmuller 23 Dec '21

23 Dec '21

Not sure if this is the behavior to expect, but I would like to get formatted inline headers in itemize like: – Unformatted item. – *Head One.* Something bla bla. – *Head Two.* Other bla bla. From: \setupitemize[each][2, headintext] % \setupitemize[each][headstyle={\groupedcommand{\bf}{.\space\tf}}] \setupitemize[each][headcolor=red, headstyle=bold] \startitemize \item Unformatted item. \head Head One \par Something bla bla. \starthead Head Two \stophead Other bla bla. % Even worse: No inline any more. \stopitemize However, headstyle= and headcolor= seem to spill all over … Is it a feature or a bug? Thanks Benjamin

2 2

Displaying names in Chicago-Turabian "note" style
by Joel 21 Dec '21

21 Dec '21

I could not find any existing solution for using Chicago-Turabian "note" style in ConTeXt, so I have started my own attempt. Chicago-Turabian uses footnotes to display the author's details on the same page, but also uses a bibliography to display an alphabetical list of the sources again at the end. The footnotes display somewhat differently each time a source is shown. The first time a source is cited, the footnote contains a long, detailed reference. Subsequent reappearances of the same citation are abbreviated somewhat. And "ibid" is used when the source is cited twice in a row. The bibliography entry contains really detailed information, similar to what was shown in the first footnote, with minor differences. This code uses three macros: \turabian, used only the first time a source is reference, \shortturabian, used for subsequent references of the same source, and `\ibid, for when a source is referenced twice in a row. Each of these macros simply creates a footnote, showing the author's details, and also uses \nocite to make sure an entry is added to \placelistofpublications. Page details are optionally added in #2, and this information only appears in the footnotes. I am having trouble getting the code to display the author's names correctly. Every attempt ends with strange results, like "FirstLast" with no space or just "Initial Last". Chicago-Turabian displays the names differently, depending on the placement: (1) First, the \turabian macro should show in ordinary First + Last order in the footnote, example: "Anna Burns, Robert Smith, and Judith Green", but if the number of authors exceeds 3, it display "Anna Burns et al." (2) Second, the \shorturabian macro should show just the Last names in the footnote: "Burns, Smith, and Green", also using "Burns et al." if there are more than 3 names. (3) The \ibid macro doesn't show any names. (4) Finally, the actual bibliographic entry in \placelistofpublications uses a strange format, with the first author listed as Last + First order, all subsequent authors in First + Last order, such as "Burns, Anna, Robert Smith, and Judith Green.", meanwhile "et al." is never used in the bibliography, even if there are 100 authors. Any help would be greatly appreciated! --Joel Minimal working example follows: \startbuffer [bib] @Book{ball1996, author = {Ball, Larry}, title = {Desert lawmen: The high sheriffs \word{of} New Mexico \word{and} Arizona, 1846-1912}, publisher = {University \word{of} New Mexico Press}, year = {1996}, address = {Albuquerque, NM}, isbn = {9780826317001} } @Book{minear2009, author = {Minear, Tish and Limon, Janet}, title = {Discover Native America: Arizona, Colorado, New Mexico, \word{and} Utah}, publisher = {Hippocrene Books}, year = {2009}, address = {New York, NY}, isbn = {9780781803274} } \stopbuffer \define[3]\ifisempty{% \setbox0=\hbox{#1\unskip}% \ifdim\wd0=0pt #2% \else #3% \fi }% \usebtxdataset[bib.buffer] \startbtxrenderingdefinitions[chicagonum] \definebtx[chicagonum] [default=default, specification=chicagonum, otherstext={\btxspace{\it\btxlabeltext{others}}}, etallimit=10, etaldisplay=\btxparameter\c!etallimit, journalconversion=\v!normal, monthconversion=\v!month, title=yes, separator:names:2={\btxcomma}, separator:names:3={\btxcomma\btxlabeltext{and}\space}, separator:names:4={\btxspace\btxlabeltext{and}\space}] \setupbtxlist[chicagonum] \definebtxrendering[chicagonum] [specification=chicagonum, sorttype=authoryear, numbering=no] \startsetups btx:chicagonum:list:book \btxdoif{author}{ \btxflush{author} \btxperiod } \btxdoif{title}{ {\it\Words \btxflush{title}} \btxperiod } \btxdoif{address}{ \btxflush{address} \btxcolon } \btxdoif{publisher}{ \btxflush{publisher} \btxcomma } \btxdoif{year}{ \btxflush{year} \btxperiod } \removeunwantedspaces \stopsetups \startsetups btx:chicagonum:list:article \btxdoif{author}{ \btxflush{author} \btxperiod } \btxdoif{title}{ \quotation{\Words \btxflush{title}} \btxperiod } \btxdoif{journal}{ {\it\Words \btxflush{journal}} } \btxdoif{volume}{ \btxflush{volume} \btxcomma } \btxdoif{number}{ no.~\btxflush{number} } \btxdoifelse{month}{ (\btxflush{month} \btxflush{year}) \btxcolon }{ \btxdoif{year}{ (\btxflush{year}) } \btxcolon } \btxdoif{pages}{ \btxflush{pages} \btxperiod } \removeunwantedspaces \stopsetups \stopbtxrenderingdefinitions \setupbtx[chicagonum][dataset=default, authorconversion={normal}, etallimit=] \setupbtx[chicagonum:list:author] [authorconversion={normal}, etallimit=] \setupbtx[chicagonum:cite:author] [authorconversion={normal}, etallimit=3, etaldisplay=1] \usebtxdefinitions[chicagonum] \define[2]\turabian{% \footnote{% \ifisempty{\cite[author][#1]}{}{\cite[author][#1]}% \ifisempty{\cite[title][#1]}{}{,\ {\it\Words \cite[title][#1].}}% \ifisempty{\cite[address][#1]\cite[publisher][#1]\cite[year][#1]}{}{\ (}% \cite[address][#1]: ~% \ifisempty{\cite[journal][#1]}{\ifisempty{\cite[publisher][#1]}{}{\cite[publisher][#1]:\ }}{\cite[journal][#1]:\ }% \ifisempty{\cite[year][#1]}{}{,\ \cite[year][#1]}% \ifisempty{\cite[address][#1]\cite[publisher][#1]\cite[year][#1]}{}{)}% \ifisempty{#2}{.}{,\ #2.}% }% \nocite[#1]% }% \define[2]\shortturabian{% \footnote{% \ifisempty{\cite[author][#1]}{}{\cite[author][#1]}% \ifisempty{#2}{.}{,\ #2.}% }% \nocite[#1]% }% \define[2]\ibid{ \footnote{% Ibid\ifisempty{#2}{.}{,\ #2.}% }% \nocite[#1]% } \starttext \input knuth \turabian{ball1996}{1\endash 23} \input knuth \turabian{minear2009}{32\endash 23} \ibid{minear2009}{32\endash 23} \ibid{minear2009}{} \input knuth \turabian{ball1996}{} \input knuth \shortturabian{minear2009}{121\endash 99} \startchapter[title=Bibliography] \placelistofpublications \stopchapter \stoptext

3 2

MP: problem connecting paths.
by Fabrice L 20 Dec '21

20 Dec '21

Dear list, I have a problem connecting path with the operator « & » (page 16 Metafun manual). The problem is illustrated by the code (and the joined PDF) which follows. I draw random cycled forms (left part of the figure) and when they interact, they are modified to « fit together » (right part of the figure) . When building these new forms, I connect paths (usually two or three depending on position 0 of the path); the last point a path is the same as the first point of the next path ; for exemple, to modify the blue circle, named « circleA », I take the circle A from P1 to P2, then a segment from P2 to P1 and cycle to have a closed path. So I should be able to do : newcircleA := circleA cutbefore P1 cutafter P2 & (P2 -- P1) & cycle ; The « & » operator is supposed to work (if I understand correctly) in this case, but I have this error message : "! Paths don't touch; `&' will be changed to `..’." Which I do not understand since the paths « touch ». There was a similar question last year, without a clear answer (« METAPOST subpath rounding issue »https://www.mail-archive.com/ntg-context@ntg.nl/msg94294.html). A solution is to ignore the repeating points : newcircleA := circleA cutbefore P1 cutafter P2 -- (P2 -- P1) -- cycle ; but this new shape has 9 points instead of 7. The problem is that I do these operations a number of times, and the length of a path (in the number of points) is increasing and cause trouble when I look for intersections with others shapes. Here is the MWE: \startMPpage path circleA , circleB ; pair P[]; circleA := fullcircle scaled 1in randomized 3 ; circleB := fullcircle scaled 1in randomized 3 shifted(0.3in,0.3in) ; draw circleA withcolor blue ; draw circleB withcolor red ; P[1] := circleA intersectionpoint circleB ; dotlabel.lft("$P_1$",P[1]) ; dotlabel.rt("$\blue\tfx P_0^A$",point 0 of circleA) ; P[2] := reverse(circleA) intersectionpoint circleB ; dotlabel.rt("$P_2$",P[2]) ; dotlabel.rt("$\red\tfx P_0^B$",point 0 of circleB) ; path newcircleA , newcircleB ; % newcircleA := circleA cutbefore P1 cutafter P2 & (P2 -- P1) & cycle ; % previous line gives an error : % "! Paths don't touch; `&' will be changed to `..'." newcircleA := circleA cutbefore P1 cutafter P2 -- (P2 -- P1) -- cycle ; newcircleA := newcircleA xshifted 2in ; draw newcircleA withcolor darkgreen ; newcircleB := (circleB cutafter P1) -- (P1 -- P2) -- (circleB cutbefore P2 ) & cycle ; newcircleB := newcircleB xshifted 2in ; draw newcircleB withcolor black ; drawpoints newcircleA ; drawpointlabels newcircleA ; \stopMPpage I would appreciate any help ! Thanks ! Fabrice.

2 4

shrink inter-line space
by mf 20 Dec '21

20 Dec '21

Hello list, here's a MWE to shrink the distance between two lines: \starttext \samplefile{ward}\par \blank \bgroup \baselineskip=0pt \samplefile{ward}\par \egroup \stoptext How can I get lines closer, even overlapping? Massi

3 6

Gap in rows if tabulate includes a startitemize
by Jorge Manuel 20 Dec '21

20 Dec '21

Dear Sirs I try to tabulate information in two columns: in the first a have a text sentence in the second I need to include a list of itens. My approach is like this: \starttabulate[|p(4cm)|p|] \FL \NC Objetivos \NC Estratégias \NC\NR \LL \NC Melhorar a qualidade do sucesso educativo \NC \startitemize \item one \item two \stopitemize \NC\NR \HL \stoptabulate On some cases the text and the list are correctly confined to the limits (\LL and \HL). But, in other cases, in the second column is inserted a gap (see the attach). How can I fix this. Thanks in advance. Jorge Magalhães Jorge Magalhães

2 4

Found a weird URL that breaks things
by Bruce Horrocks 20 Dec '21

20 Dec '21

Hi, The following MWE won't compile for me: \setupinteraction [state=start] \starttext Click me: \goto{https://forum.swissmicros.com/viewtopic.php?f=2&p=22236#p22236} [url(https://forum.swissmicros.com/viewtopic.php?f=2&p=22236#p22236)] \stoptext under "mtx-context | current version: 2021.12.10 11:41" \useURL fails as well so I assume it's in the URL parser. — Bruce Horrocks Hampshire, UK

2 2

How to use a variable in a macro agrument
by skyhorse＠gmx.us 18 Dec '21

18 Dec '21

I have a need to use a logo graphics file several times in a document. I somethings need to update to a newer graphics file. I only want to make one change to the original variable value definition. I've tried using \define.. but it's not working for me. Here is my MWE: %%%%%%%% \define[]\logofile{an_image_file.png} % Here defining the variable with the filename to use. \definelayer[stillimage] \setlayer[stillimage]{\externalfigure[\logofile]} % Here trying to use the \logofile macro. \setupbackgrounds[page][background=stillimage] \starttext \input knuth \stoptext What's the accepted way to do this or are macro arguments not allowable? Thanks

3 2

Re: [NTG-context] \startcolumnset ... \stopcolumnset fatal error: return code 11
by John Kitzmiller 17 Dec '21

17 Dec '21

> > Date: Fri, 17 Dec 2021 08:49:55 +0900 > From: Jeong Dal <haksan(a)me.com> > Subject: [NTG-context] \startcolumnset ... \stopcolumnset fatal error: > return code 11 > > I have used newcolumnset module to make a test sheet. It was made by the > help of experts in the list. > It worked fine a month ago and also worked via TeXlive 2021. > But I got error using the recent version. > Thanks Nicola and John for testing. > > I have listed it before and tried to find out the cause. > I have test the following file in the editors, vscode, vim, atom and even > in the terminal. > It might be an apple binary problem as Hans suspected. > I’d like to know that it is the only problem for Mac users. > > Here is the code and the part of error message: > It was tested in vscode, vim and terminal too. > > I am using Mac OSX, > ConTeXt ver: 2021.12.03 15:20 LMTX fmt: 2021.12.9 int: english/english > > Thank you for reading. > Best regards, > > Dalyoung > I confirm Dalyoung's problem with \columnsets on Mac OSX with current lmtx. The following MnWE worked on July 2021 versions of lmtx, but does not work with December versions (gives Fatal Error 11) \definecolumnset[example][n=2] \starttext \startcolumnset[example] \dorecurse{20}{\input bryson} \stopcolumnset \stoptext system > ConTeXt ver: 2021.12.14 19:19 LMTX fmt: 2021.12.16 int: english/english mtx-context | fatal error: return code: 11 HTH, John

1 0

Extra shift with ornament
by Mikael Sundqvist 17 Dec '21

17 Dec '21

Hi, When using an ornament on a \startframedtext \stoptextframed the frame is shifted just a little bit. Can one get rid of that shift? MWE below. /Mikael \defineornament[MyOrn][ corner={right,bottom}, location={right,top}, alternative=b, ][ frame=off, ] \showframe \starttext \startframedtext[width=\textwidth,height=2cm]foo\stopframedtext \MyOrn{bar}{\startframedtext[width=\textwidth,height=2cm]foo\stopframedtext} \stoptext

2 2

Re: [NTG-context] Title for tabulate
by Benjamin Buchmuller 17 Dec '21

17 Dec '21

Hi! I'd like to follow up on a problem that Denis came across recently with the titles argument in tabulate. (It's more a solution than a question, but any hints to improve the answer are welcome.) I wanted to use this argument for an easy specification of, well, a title for a "recipe". The advantage is that all information is held together and it's easy to use for people who are not (too) familiar with ConTeXt. So, in one file I can define all styles (which the end-user would not need to see): \definetabulate[recipe][|l|l|p|l|] \setuptabulate [recipe] [ bodyfont=small, distance=medium, before={\blank[back, small]}, header=text, headstyle=\bi, % this formats the "\BC" cells headcolor=red, % this formats the "\BC" cells ] \starttext And then use: \startrecipe[title={Whatever mixture 1}] \FL \NC Absolute \BC Stock \NC Ingredient \NC Final \NR \HL \NC 1 \NR \LL \stoprecipe \startrecipe[title={Whatever mixture 2}] \FL \BC Absolute \BC Stock \BC Ingredient \BC Final \NR \HL \NC 1 \NR \LL \stoprecipe \stoptext etc. However, I cannot change the way the title is styled (or spaced from the table) unless I do "title={\bi Some text.}". However, blank commands are also stripped off at this place. (I also don't get a clue from the source if there is any argument to spike-in some formatting.) So, if there is no easy way to access this one, we can work around: \definetabulate[recipetab][|l|l|p|l|] \setuptabulate [recipetab] [ bodyfont=small, distance=medium, before={\blank[back, small]}, % header=text, % THIS MUST NOT BE "text" headstyle=bold, headcolor=red, ] \define\startrecipe{\dodoubleempty\dostartrecipe} \long\def\dostartrecipe[#1][#2]#3\stoprecipe{% \iffirstargument {\bi #1}\blank[medium] \fi \ifsecondargument \startrecipetab[#2] #3 \stoprecipetab \else \startrecipetab #3 \stoprecipetab \fi } \startrecipe[Head 1] \FL \BC Absolute \BC Stock \BC Ingredient \BC Final \NR \HL \NC 1 \NR \LL \stoprecipe \startrecipe[Head 2][headcolor=blue] % pass on arguments to tabulate \FL \BC Absolute \BC Stock \BC Ingredient \BC Final \NR \HL \NC 1 \NR \LL \stoprecipe Small question though: Is there a ConTeXt way to "\long\def" or a simple way ("user interface") to filter a list of arguments for a specific key=val pair, e.g. to make a single optional argument with headertitle={Some header.}? Best Benjamin

2 5