- ntg-context - NTG Mailing Lists

layers x 2
by jbf 28 Apr '21

28 Apr '21

Hi list, Is it possible to place two layers on the same page? I have several pages where that would be necessary. On the first of those pages, it did actually work, but on the remaining other pages, the second layer, even though located at the bottom of the page, eliminates the first layer. I have simply set them up one after the other. As you can see, the 1st is towards the top left of the page, while the second is bottom right. \definelayer[blessings] % name of the layer [x=0mm, y=0mm, % from upper left corner of paper width=\paperwidth, height=.5\paperheight] % let the layer cover the full paper \setlayer[blessings] % name of the layer [hoffset=.09\textwidth, voffset=1.7cm] % placement (from upper left corner of the layer) {\externalfigure[bless.eps][width=3cm]} % the actual contents of the layer \setupbackgrounds[page][background=blessings] \definelayer[tree] % name of the layer [x=0mm, y=0mm, % from upper left corner of paper width=\paperwidth, height=\paperheight] % let the layer cover the full paper \setlayer[tree] % name of the layer [hoffset=.75\textwidth, voffset=15.1cm] % placement (from upper left corner of the layer) {\externalfigure[Pohutukawa.jpg][width=.5\textwidth]} % the actual contents of the layer \setupbackgrounds[page][background=tree] What am I doing wrong? Julian

2 4

Re: [NTG-context] Conflict between MetaPost (LMTX) and cmarrows
by Hans Hagen 27 Apr '21

27 Apr '21

On 4/27/2021 6:31 PM, Jairo A. del Rio wrote: > Hi, Hans. I've attached the relevant files. > > Jairo > > El mar, 27 de abr. de 2021 a la(s) 07:35, Hans Hagen (j.hagen(a)xs4all.nl > <mailto:j.hagen@xs4all.nl>) escribió: > > On 4/27/2021 9:23 AM, Jairo A. del Rio wrote: > > So, should I share relevant files? AFAIK only cmarrows and .mf > files in > > the cm source folder are involved. I hope you can check it if a > solution > > is possible and not too demanding. Thanks beforehand. > you can make a minimal failure example but I gues sthat the solution > has > to be in the mf macros (as there is where some pair/numeric clash > happens) indeed, as i mentioned, some variable is not set up right you need to patch (probably in all these arrow files) save x,y,x_,y_; to save x,y,x_,y_,z_; and (in mapto) numeric x,x_[],y,y_[]; to numeric x,x_[],y,y_[]; pair z_[]; Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

1 1

Conflict between MetaPost (LMTX) and cmarrows
by Jairo A. del Rio 27 Apr '21

27 Apr '21

The following: \starttext \startMPinitializations input cmarrows; setup_cmarrows(arrow_name = "texarrow"; parameter_file = "cmr6.mf"; macro_name = "nicearrow"); \stopMPinitializations \startMPpage nicearrow (origin -- (1cm*left)); \stopMPpage \stoptext compiles perfectly with ConTeXt MkIV. With LMTX, however, the following happens: metapost > initializing instance 'metafun:1' using format 'metafun' and method 'default' metapost > loading 'metafun' as 'metafun.mpxl' using method 'default' metapost > initializing number mode 'scaled' metapost > message : Loading cmarrows 2006/12/18, v0.9 metafun > log > overloading immutable 'eps' metafun > log > metafun > log > error: Equation cannot be performed (numeric=pair) metafun > log > metapost > log > metapost > log > <to be read again> metapost > log > ; metapost > log > <for((6.58641,1.4944))> z_[incr.n]:=(EXPR0); metapost > log > ENDFOR metapost > log > <argument> ...nt(length(path))of(path),z2,point.ttt.of(path),z9-(0,3rule_thickness#),point.tt.of(path)-3rule_thickness#*(unitvector(direction.tt.of(path))rotated90):z_[incr.n]:=z;endfor metapost > log > ;transform.T... metapost > log > hide->exitif.numeric.begingroup(TEXT0) metapost > log > ;endgroup; metapost > log > mapto->begingroup.hide(numeric.n;n:=0;numeric.x,x_[],y,y_[];for.z=(TEXT2):z_[incr.n]:=z;endfor;transform.T;z_2=z_1transformed.T;z_4=z_3transformed.T;z_6=z_5transformed.T;) metapost > log > T.endgroup metapost > log > nicearrow__sgbxww->...(z0,point(length(EXPR2))of(EXPR2),z2,point.ttt.of(EXPR2),z9-(0,3rule_thickness#),point.tt.of(EXPR2)-3rule_thickness#*(unitvector(direction.tt.of(EXPR2))rotated90)) metapost > log > ;fi.save.f,s... metapost > log > <to be read again> metapost > log > ; metapost > log > <*> nicearrow (origin -- (1cm*left)); metafun > log > metafun > log > I'm sorry, but I don't know how to make such things equal. (See the two expressions just above the error message.) metafun > log > metapost > log > ; metapost > log > What's happening? Is that intended or a bug? Jairo

2 5

Style options and setupinterlinespace
by denis.maier＠ub.unibe.ch 27 Apr '21

27 Apr '21

Hi, the wiki (https://wiki.contextgarden.net/Font_Switching) currently says: > These quick font switches are meant for changing the font style, alternative, or size of a few words: they do not change the bodyfont, so they don't affect interline spacing or math font sizes. So, if you want to change the font size of an entire paragraph, use \switchtobodyfont<https://wiki.contextgarden.net/Command/switchtobodyfont> described below in Complete Font Change<https://wiki.contextgarden.net/Font_Switching#Complete_font_change>. However, it is fine to use them as style directives in setup commands, that is, using them as an option for style=<https://wiki.contextgarden.net/Style_and_Color_Parameters>... in any setup command that accepts style option >From this, I'd infer that a <style=tfx> or <style=\tfx> should change the interline spacing as well. But it does not seem to be the case as the example below shows. Best, Denis ---------------------------------------------------------------------------------------------- \definedelimitedtext[blockquoteA] \setupdelimitedtext[blockquoteA] [ style=tfx, spacebefore=medium, ] \definedelimitedtext[blockquoteB] \setupdelimitedtext[blockquoteB] [ before={\tfx\setupinterlinespace}, spacebefore=medium, ] \starttext \input knuth \startblockquoteA \input knuth \stopblockquoteA \input knuth \startblockquoteB \input knuth \stopblockquoteB \input knuth \stoptext ----------------------------------------------------------------------------------------------

5 9

clubs and widows in columns
by Jano Kula 27 Apr '21

27 Apr '21

Dear list, is there a way to avoid clubs and widows in columns? I don't know, how it would be implemented, if the task is splitting typeset vertical list. \setuppapersize[A7] \starttext \startcolumns[separator=rule, align={right,nothyphenated}] \dorecurse{12}{→ one two three four five\par} \stopcolumns \stoptext For a different task: are there some higher level commands in ctx than \vsplit primitive to play with vbox splitting? Thank you, Jano

2 2

profies and fonts in current latest (2021.04.26 00:55)
by Pablo Rodriguez 27 Apr '21

27 Apr '21

Dear list, I have the following sample: \setupbackend [format=PDF/A-3a, intent=sRGB IEC61966-2.1, profile={sRGB, default_gray.icc}, level=0] \setuptagging[state=start] \setupcolors[cmyk=no, pagecolormodel=auto] \definefontfamily[mainface][rm][TeX Gyre Heros] \definefontfamily[mainface][tt][Cousine] \setupbodyfont[mainface] \starttext \input zapf \tt\input zapf \stoptext I’m afraid that Acrobat isn’t able to display the fonts and SumatraPDF displays random characters with Cousine, when compiled with current latest (from 2021.04.26 00:55). Previous latest from 2021.04.21 11:39 has no probles with the fonts (either in Acrobat, or in SumatraPDF). Could anyone confirm this issue? Many thanks for your help, Pablo -- http://www.ousia.tk

2 2

Re: [NTG-context] new page before xtable with repeated headers
by Werner Hennrich 26 Apr '21

26 Apr '21

Am 25.04.21 um 10:52 schrieb Wolfgang Schuster: > Yes, some slack is needed to avoid the table being pushed to the next > space because not enough space is available. I recommend also to > ensure a minimum amount of space (e.g. 5 lines) is available to avoid > tables with just a few rows. > > Wolfgang I caught a some fail-cases (attached) using a test-runner (linux/bash/python3, attached as well) - hope this helps. Thanks in advance und best regards, Werner

1 0

[formatting verbatim text]
by Floris van Manen 26 Apr '21

26 Apr '21

What is the easiest way, if possible, to highlight some sections of verbatim text? given: \starttyping one two three four five six seven eight nine \stoptyping i'd like to color the word 'five' in red, or italic. .Floris

2 4

font message?
by Hans van der Meer 26 Apr '21

26 Apr '21

I get the following message in the log (latest beta): fonts > ! fonts > ! check count_components with mkiv ! fonts > ! These are my font settings: \definefontfeature [default] [default] [itlc=yes] \setupbodyfont[schola,10pt] \setupitaliccorrection [text] What does it mean? Is there something I should do? dr. Hans van der Meer

2 1

Fwd: Corrupt PDF files with LMTX?
by Jairo A. del Rio 26 Apr '21

26 Apr '21

---------- Forwarded message --------- De: Jairo A. del Rio <jairoadelrio6(a)gmail.com> Date: sáb, 24 de abr. de 2021 a la(s) 08:05 Subject: Re: [NTG-context] Corrupt PDF files with LMTX? To: Hans Hagen <j.hagen(a)xs4all.nl> The following: \starttext \startMPpage fill fullcircle scaled 1cm withcolor red \stopMPpage \stoptext gives **** Error: stream Length incorrect. Output may be incorrect. **** Error: stream Length incorrect. Output may be incorrect. However, an image is generated. However, when it includes text, the message above appears. As Thomas says, it happens even with simple documents. Jairo El sáb, 24 de abr. de 2021 a la(s) 01:36, Hans Hagen (j.hagen(a)xs4all.nl) escribió: > On 4/24/2021 8:03 AM, Jairo A. del Rio wrote: > > Hi, list! > > When I try to convert a PDF generated by ConTeXt LMTX to PNG using > > ImageMagick's convert the following happens: > hard to handle when there is no mwe ... > > Hans > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl > ----------------------------------------------------------------- >

2 2