- ntg-context - NTG Mailing Lists

ifxmlselfempty
by Hans van der Meer 04 Sep '23

04 Sep '23

Is it possible that the new \ifxmlselfempty has reversed its outcome? Or did I something wrong in this MWE? Here an MWE. yours sincerely dr. Hans van der Meer \startbuffer[test] <what> <emptynode value="!empty node!"/> <notemptynode>!not empty node!</notemptynode> </what> \stopbuffer \startxmlsetups xml:mysetups \xmlsetsetup{\xmldocument}{something|emptynode|notemptynode}{xml:*} \stopxmlsetups \xmlregistersetup{xml:mysetups} \startxmlsetups xml:emptynode node=\xmltag{#1}:\crlf ifxmlselfempty-else-fi:\space \ifxmlselfempty{#1} attribute = \xmlatt{#1}{value} \else content = \xmlflush{#1} \fi \crlf ifxmlselfempty-else-fi reversed:\space \ifxmlselfempty{#1} content = \xmlflush{#1} \else attribute = \xmlatt{#1}{value} \fi \blank \stopxmlsetups \startxmlsetups xml:notemptynode node=\xmltag{#1}:\crlf ifxmlselfempty-else-fi:\space \ifxmlselfempty{#1} attribute = \xmlatt{#1}{value} \else content = \xmlflush{#1} \fi \crlf ifxmlselfempty-else-fi reversed:\space \ifxmlselfempty{#1} content = \xmlflush{#1} \else attribute = \xmlatt{#1}{value} \fi \blank \stopxmlsetups \startxmlsetups xml:something \xmlall{#1}{./emptynode}\blank \xmlall{#1}{./notemptynode}\blank \stopxmlsetups \starttext \ConTeXt\ \contextversion\blank \xmlprocessbuffer{main}{test}{} \stoptext

3 3

Cron <context@cgl> /var/www/aanhet.net/context/bin/cron/context-mirror
by root＠ntg.nl 04 Sep '23

04 Sep '23

receiving incremental file list ./ ctan.lsr document-2.htm download-1.htm download-2.htm logo-ade.png logo-cts.png logo-pod.png rss.xml show-fil.pdf context/latest/ context/latest/cont-lmt.zip context/latest/cont-mpd.zip context/latest/cont-ppc.zip context/latest/cont-sci.zip context/latest/cont-tmf.zip context/latest/cont-tst.7z context/latest/cont-tst.tar.xz context/latest/cont-tst.zip general/manuals/ general/manuals/primitives.pdf sent 178,012 bytes received 39,004,718 bytes 3,407,193.91 bytes/sec total size is 566,603,244 speedup is 14.46 Running archiver: New dir: /var/www/aanhet.net/context//htdocs/archives/context-2023-09-04.20 235024088 /var/www/aanhet.net/context//htdocs/archives/context-2023-09-04.20/latest 126745317 /var/www/aanhet.net/context//htdocs/archives/context-2023-09-04.20/current 361773501 /var/www/aanhet.net/context//htdocs/archives/context-2023-09-04.20 361773501 total

1 0

new upload
by Hans Hagen 04 Sep '23

04 Sep '23

Hi, new upload with packed itemize fix .. hopefyully no side effects of some work in progress (but no crashes in test suite so likely ok) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

2 1

After compiling
by Ursula Hermann 04 Sep '23

04 Sep '23

There is no pdf to read. Uschi Hermann. Sorry, dindn't write my name in the first Mail Today. Von: Ursula Hermann Gesendet: Montag, 04. September 2023 11:44 An: 'ntg-context(a)ntg.nl' <ntg-context(a)ntg.nl<mailto:ntg-context@ntg.nl>> Betreff: Dear List, After compiling the following example, which is from February 2021: \setuppapersize[A8,landscape] \setuplayout[leftmargin=2.5cm, leftmargindistance=0.2cm, backspace=2.9cm, width=4cm] \showframe \starttext \margintext{\hairline\\{Me}}\dontleavehmode\hairline \startformula a^n + b^n = c^n. \stopformula \stoptext I get: Command Line: context.exe --synctex=-1 "blackrule1.tex" Startup Folder: \\ub.univie.ac.at\U_Dom\Users<file://ub.univie.ac.at/U_Dom/Users> G-L\Hermann\Documents\Texlive resolvers | formats | executing runner 'run luametatex format': luametatex --jobname="./blackrule1.tex" --socket --shell-escape --fmt=C:/Users/Hermann/Downloads/context-mswin/tex/texmf-cache/luametatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luametatex/cont-en.fmt --lua=C:/Users/Hermann/Downloads/context-mswin/tex/texmf-cache/luametatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luametatex/cont-en.lui --c:currentrun=1 --c:fulljobname="./blackrule1.tex" --c:input="./blackrule1.tex" --c:kindofrun=1 --c:maxnofruns=9 --c:synctex="-1" --c:texmfbinpath="C:/Users/Hermann/Downloads/context-mswin/tex/texmf-mswin/bin" "\\ub.univie.ac.at\U_Dom\Users G-L\Hermann\Documents\Texlive<file://ub.univie.ac.at/U_Dom/Users%20G-L/Hermann/Documents/Texlive>" CMD.EXE wurde mit dem oben angegebenen Pfad als aktuellem Verzeichnis gestartet. UNC-Pfade werden nicht untersttzt. Stattdessen wird das Windows-Verzeichnis als aktuelles Verzeichnis gesetzt. system > system > ConTeXt ver: 2023.09.03 19:03 LMTX fmt: 2023.9.4 int: english/english system > system > 'cont-new.mkxl' loaded open source > level 1, order 1, name 'C:/Users/Hermann/Downloads/context-mswin/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl' system > beware: some patches loaded from cont-new.mkiv close source > level 1, order 1, name 'C:/Users/Hermann/Downloads/context-mswin/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl' system > files > jobname './blackrule1', input './blackrule1.tex', result './blackrule1' fonts > latin modern fonts are not preloaded languages > language 'en' is active system > synctex functionality is enabled, expect 5-10 pct runtime overhead! runtime error : input file './blackrule1.tex' is not found, quitting mtx-context | fatal error: return code: 1

4 5

no packed in current latest (LMTX only)
by Pablo Rodriguez 04 Sep '23

04 Sep '23

Dear list, after updating to current latest (from 2023.09.03 19:03), packed list doesn’t seem to work in LMTX: \starttext \startTEXpage[offset=1em] \startitemize[packed] \item item \item item \stopitemize \stopTEXpage \stoptext MkIV gets packed lists just right. Could anyone confirm this? Many thanks for your help, Pablo

3 2

Trimming (rearranging) long section name
by context＠vivaldi.net 04 Sep '23

04 Sep '23

Hello, is there a way to alter the section name to be " Specifické požadavky pro předpokládanou technologii stavby (přístupy, přívody el. energie, skladovací plochy, montážní a pomocné plochy, montážní a pomocné konstrukce, ...) " instead of " Specifické požadavky pro předpokládanou technologii stavby (přístupy, přívody el. energie, skladovací plochy, mon- tážní a pomocné plochy, montážní a pomocné konstrukce, ...) " IOW to force the word "stavby" not to cross the right border (see the green vertical line) but to appear on the next line? I played with "strict", "verytolerant" and similar options but they seem not to affect section titles. (MkIV solution preferably.) Best regards, Lukas

3 4

Different Layout for First Page
by Jeroen 04 Sep '23

04 Sep '23

I have a document with the first page in startfrontmatter and all other pages in startbodymatter. The layout setting is as following \setuplayout [backspace=20mm, width=175mm, topspace=15mm, header=0mm, footer=2mm, height=275mm, bottomheight=1mm, footerdistance=10mm] \setupfootertexts [title] [\pagenumber{} of \totalnumberofpages] \setupfooter[state=stop] \startfrontmatter \input{frontpage.tex} \stopfrontmatter \setupfooter[state=start] \startbodymatter \input{introduction.tex} \stopbodymatter What would be the easiest way to change the layout only for the first page since it has no footer. For the first page, I would like to have the text run all the way to the bottom with \vfill where normally the footer would be. Thanks Jeroen

2 1

Re:
by Ursula Hermann 04 Sep '23

04 Sep '23

There is no pdf to read. Uschi Hermann. Sorry, dindn't write my name in the first Mail Today. Von: Ursula Hermann Gesendet: Montag, 04. September 2023 11:44 An: 'ntg-context(a)ntg.nl' <ntg-context(a)ntg.nl> Betreff: Dear List, After compiling the following example, which is from February 2021: \setuppapersize[A8,landscape] \setuplayout[leftmargin=2.5cm, leftmargindistance=0.2cm, backspace=2.9cm, width=4cm] \showframe \starttext \margintext{\hairline\\{Me}}\dontleavehmode\hairline \startformula a^n + b^n = c^n. \stopformula \stoptext I get: Command Line: context.exe --synctex=-1 "blackrule1.tex" Startup Folder: \\ub.univie.ac.at\U_Dom\Users<file://ub.univie.ac.at/U_Dom/Users> G-L\Hermann\Documents\Texlive resolvers | formats | executing runner 'run luametatex format': luametatex --jobname="./blackrule1.tex" --socket --shell-escape --fmt=C:/Users/Hermann/Downloads/context-mswin/tex/texmf-cache/luametatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luametatex/cont-en.fmt --lua=C:/Users/Hermann/Downloads/context-mswin/tex/texmf-cache/luametatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luametatex/cont-en.lui --c:currentrun=1 --c:fulljobname="./blackrule1.tex" --c:input="./blackrule1.tex" --c:kindofrun=1 --c:maxnofruns=9 --c:synctex="-1" --c:texmfbinpath="C:/Users/Hermann/Downloads/context-mswin/tex/texmf-mswin/bin" "\\ub.univie.ac.at\U_Dom\Users G-L\Hermann\Documents\Texlive<file://ub.univie.ac.at/U_Dom/Users%20G-L/Hermann/Documents/Texlive>" CMD.EXE wurde mit dem oben angegebenen Pfad als aktuellem Verzeichnis gestartet. UNC-Pfade werden nicht untersttzt. Stattdessen wird das Windows-Verzeichnis als aktuelles Verzeichnis gesetzt. system > system > ConTeXt ver: 2023.09.03 19:03 LMTX fmt: 2023.9.4 int: english/english system > system > 'cont-new.mkxl' loaded open source > level 1, order 1, name 'C:/Users/Hermann/Downloads/context-mswin/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl' system > beware: some patches loaded from cont-new.mkiv close source > level 1, order 1, name 'C:/Users/Hermann/Downloads/context-mswin/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl' system > files > jobname './blackrule1', input './blackrule1.tex', result './blackrule1' fonts > latin modern fonts are not preloaded languages > language 'en' is active system > synctex functionality is enabled, expect 5-10 pct runtime overhead! runtime error : input file './blackrule1.tex' is not found, quitting mtx-context | fatal error: return code: 1 _____________________________________________________________________ ConTeXt Compilation Report (Pages: 0) Errors: 0 Warnings: 0 Bad Boxes: 0

1 0

(no subject)
by Ursula Hermann 04 Sep '23

04 Sep '23

Dear List, After compiling the following example, which is from February 2021: \setuppapersize[A8,landscape] \setuplayout[leftmargin=2.5cm, leftmargindistance=0.2cm, backspace=2.9cm, width=4cm] \showframe \starttext \margintext{\hairline\\{Me}}\dontleavehmode\hairline \startformula a^n + b^n = c^n. \stopformula \stoptext I get: Command Line: context.exe --synctex=-1 "blackrule1.tex" Startup Folder: \\ub.univie.ac.at\U_Dom\Users G-L\Hermann\Documents\Texlive resolvers | formats | executing runner 'run luametatex format': luametatex --jobname="./blackrule1.tex" --socket --shell-escape --fmt=C:/Users/Hermann/Downloads/context-mswin/tex/texmf-cache/luametatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luametatex/cont-en.fmt --lua=C:/Users/Hermann/Downloads/context-mswin/tex/texmf-cache/luametatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luametatex/cont-en.lui --c:currentrun=1 --c:fulljobname="./blackrule1.tex" --c:input="./blackrule1.tex" --c:kindofrun=1 --c:maxnofruns=9 --c:synctex="-1" --c:texmfbinpath="C:/Users/Hermann/Downloads/context-mswin/tex/texmf-mswin/bin" "\\ub.univie.ac.at\U_Dom\Users G-L\Hermann\Documents\Texlive" CMD.EXE wurde mit dem oben angegebenen Pfad als aktuellem Verzeichnis gestartet. UNC-Pfade werden nicht untersttzt. Stattdessen wird das Windows-Verzeichnis als aktuelles Verzeichnis gesetzt. system > system > ConTeXt ver: 2023.09.03 19:03 LMTX fmt: 2023.9.4 int: english/english system > system > 'cont-new.mkxl' loaded open source > level 1, order 1, name 'C:/Users/Hermann/Downloads/context-mswin/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl' system > beware: some patches loaded from cont-new.mkiv close source > level 1, order 1, name 'C:/Users/Hermann/Downloads/context-mswin/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl' system > files > jobname './blackrule1', input './blackrule1.tex', result './blackrule1' fonts > latin modern fonts are not preloaded languages > language 'en' is active system > synctex functionality is enabled, expect 5-10 pct runtime overhead! runtime error : input file './blackrule1.tex' is not found, quitting mtx-context | fatal error: return code: 1 _____________________________________________________________________ ConTeXt Compilation Report (Pages: 0) Errors: 0 Warnings: 0 Bad Boxes: 0

1 0

Bug or feature? \numexpression and hashes
by Jairo A. del Rio 04 Sep '23

04 Sep '23

Hi, list. The following fails with a "Missing number, treated as zero" error prompt: \starttext \expandedrepeat2{\expandedrepeat2{\the\numexpression#I+#P\relax\ }} \stoptext OTOH, \numexpr works seamlessly. Tested on ConTeXt 2023.09.03 19:03. Thanks in advance. Best regards, Jairo

2 1