Why does every new \setupTABLE add more whitespace to the left of table?

newer
Post-processing ConTeXt's output...

older
Natural TABLE does not split with...

Hamid Kamrani

2 Jul 2007 2 Jul '07

4:04 p.m.

What's the reaosn for this behaviour? Try: \starttext \startbuffer \start \setupTABLE[frame=on] \bTABLE\bTR\bTD text \eTD\eTR\eTABLE \stop \stopbuffer \framed[offset=overlay]{\getbuffer} \startbuffer \start \setupTABLE[frame=on] \setupTABLE[c][1][align=right] \bTABLE\bTR\bTD text \eTD\eTR\eTABLE \stop \stopbuffer \framed[offset=overlay]{\getbuffer} \startbuffer \start \setupTABLE[frame=on] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \bTABLE\bTR\bTD text \eTD\eTR\eTABLE \stop \stopbuffer \framed[offset=overlay]{\getbuffer} \startbuffer \start \setupTABLE[frame=on] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \bTABLE\bTR\bTD text \eTD\eTR\eTABLE \stop \stopbuffer \framed[offset=overlay]{\getbuffer} \stoptext

Show replies by date

Wolfgang Schuster

3 Jul 3 Jul

8:20 a.m.

New subject: Why does every new \setupTABLE add more whitespace to the left of table?

2007/7/2, Hamid Kamrani :

...

What's the reaosn for this behaviour?

Try:

\starttext \startbuffer \start \setupTABLE[frame=on] \bTABLE\bTR\bTD text \eTD\eTR\eTABLE \stop \stopbuffer \framed[offset=overlay]{\getbuffer}

\startbuffer \start \setupTABLE[frame=on] \setupTABLE[c][1][align=right] \bTABLE\bTR\bTD text \eTD\eTR\eTABLE \stop \stopbuffer \framed[offset=overlay]{\getbuffer}

\startbuffer \start \setupTABLE[frame=on] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \bTABLE\bTR\bTD text \eTD\eTR\eTABLE \stop \stopbuffer \framed[offset=overlay]{\getbuffer}

\startbuffer \start \setupTABLE[frame=on] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \bTABLE\bTR\bTD text \eTD\eTR\eTABLE \stop \stopbuffer \framed[offset=overlay]{\getbuffer} \stoptext

Hi, you comment chars after your \setupTABLE commands. Your \start/\stop pair can also be removed in your examples, \framed keeps the \setups local. Wolfgang

Hamid Kamrani

6:28 p.m.

New subject: Why does every new \setupTABLE add more whitespace to the left of table?

Got it. Thanks. I didn't know that the chars after setupTABLE could disturb the alignment. On 7/3/07, Wolfgang Schuster wrote:

...

2007/7/2, Hamid Kamrani :

...
What's the reaosn for this behaviour?

Try:

\starttext \startbuffer \start \setupTABLE[frame=on] \bTABLE\bTR\bTD text \eTD\eTR\eTABLE \stop \stopbuffer \framed[offset=overlay]{\getbuffer}

\startbuffer \start \setupTABLE[frame=on] \setupTABLE[c][1][align=right] \bTABLE\bTR\bTD text \eTD\eTR\eTABLE \stop \stopbuffer \framed[offset=overlay]{\getbuffer}

\startbuffer \start \setupTABLE[frame=on] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \bTABLE\bTR\bTD text \eTD\eTR\eTABLE \stop \stopbuffer \framed[offset=overlay]{\getbuffer}

\startbuffer \start \setupTABLE[frame=on] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \bTABLE\bTR\bTD text \eTD\eTR\eTABLE \stop \stopbuffer \framed[offset=overlay]{\getbuffer} \stoptext

Hi,

you comment chars after your \setupTABLE commands.

Your \start/\stop pair can also be removed in your examples, \framed keeps the \setups local.

Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________

Wolfgang Schuster

4 Jul 4 Jul

7:36 a.m.

New subject: Why does every new \setupTABLE add more whitespace to the left of table?

2007/7/3, Hamid Kamrani :

...

Got it. Thanks. I didn't know that the chars after setupTABLE could disturb the alignment.

only in horizontal mode, e.g. in \hbox or \framed Wolfgang

Hamid Kamrani

9:19 a.m.

New subject: Why does every new \setupTABLE add more whitespace to the left of table?

Not exactly. I only framed it in order to demonstrate my problem. You may encounter it even when you don't explicitly frame the table. I became aware of it when I noticed that my legends under the table were slightly off to the left. That means that the code that joins the legend to the table must put an invisible frame around the table. On 7/4/07, Wolfgang Schuster wrote:

...

2007/7/3, Hamid Kamrani :

...
Got it. Thanks. I didn't know that the chars after setupTABLE could disturb the alignment.

only in horizontal mode, e.g. in \hbox or \framed

Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________

Wolfgang Schuster

9:32 a.m.

New subject: Why does every new \setupTABLE add more whitespace to the left of table?

2007/7/4, Hamid Kamrani :

...

Not exactly. I only framed it in order to demonstrate my problem. You may encounter it even when you don't explicitly frame the table. I became aware of it when I noticed that my legends under the table were slightly off to the left. That means that the code that joins the legend to the table must put an invisible frame around the table.

\starttext \showframe \startbuffer \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \bTABLE \bTR\bTD text \eTD\eTR \eTABLE \stopbuffer % vertical mode \getbuffer % horizontal mode \dontleavehmode\getbuffer \stoptext Wolfgang

Hamid Kamrani

9:46 a.m.

New subject: Why does every new \setupTABLE add more whitespace to the left of table?

This is what I meant: \starttext \startbuffer \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \setupTABLE[r][1][topframe=on,bottomframe=on] \bTABLE \bTR\bTD \input knuth \relax \eTD\eTR \eTABLE \stopbuffer % vertical mode \getbuffer % horizontal mode %\dontleavehmode\getbuffer \placetable[frame=off] {whow} {\placelegend[align={right}] {\dontleavehmode\getbuffer} {NOTE: hmode or not hmode the legend is still off to the left} } \stoptext On 7/4/07, Wolfgang Schuster wrote:

...

2007/7/4, Hamid Kamrani :

...
Not exactly. I only framed it in order to demonstrate my problem. You may encounter it even when you don't explicitly frame the table. I became aware of it when I noticed that my legends under the table were slightly off to the left. That means that the code that joins the legend to the table must put an invisible frame around the table.

\starttext

\showframe

\startbuffer \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \bTABLE \bTR\bTD text \eTD\eTR \eTABLE \stopbuffer

% vertical mode \getbuffer

% horizontal mode \dontleavehmode\getbuffer

\stoptext

Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________

Wolfgang Schuster

10:34 a.m.

New subject: Why does every new \setupTABLE add more whitespace to the left of table?

2007/7/4, Hamid Kamrani :

...

This is what I meant:

\starttext \startbuffer

\startsetups table

...

\setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \setupTABLE[c][1][align=right] \setupTABLE[r][1][topframe=on,bottomframe=on] \bTABLE \bTR\bTD \input knuth \relax \eTD\eTR \eTABLE \stopbuffer

\stopsetups

...

% vertical mode \getbuffer

% horizontal mode %\dontleavehmode\getbuffer

\placetable[frame=off] {whow} {\placelegend[align={right}] {\dontleavehmode\getbuffer}

{\setups{table}} % the second argument is a hbox

...

{NOTE: hmode or not hmode the legend is still off to the left} }

\stoptext

Wolfgang

6418

Age (days ago)

6420

Last active (days ago)

List overview

Download

7 comments

2 participants

participants (2)

Hamid Kamrani
Wolfgang Schuster

Why does every new \setupTABLE add more whitespace to the left of table?

tags

participants (2)