urw-garamond with MKIV

Peter Münster

12 Apr 2008 12 Apr '08

7:44 a.m.

Hello, This does no more work with MKIV: \usemodule[urwgaramond] \starttext \rm\input knuth \it\input knuth \bf\input knuth \bi\input knuth \stoptext Could anybody help me, to get urw-garamond with MKIV? (ftp://dante.ctan.org/tex-archive/fonts/urw/garamond.zip must be installed) TIA! Greetings, Peter -- http://pmrb.free.fr/contact/

Show replies by date

Taco Hoekwater

13 Apr 13 Apr

9:38 a.m.

Peter Münster wrote:

...

Hello,

This does no more work with MKIV:

I can tell you the cause of the problem: context mkiv loads the font from the AFM files in unicode mode, but the typescript defines TFM fonts in texnansi only. This results in mayhem (I am not sure what exactly goes wrong, but that does not really matter). If you want existing tfms to have precedence over any afms (thereby loosing unicode support for legacy fonts) you can add this to cont-sys or the top of your input: \ctxlua{fonts.define.method=2} Otherwise, you will have to extend type-urwgaramand.tex in some way that I do not quite grasp. Best wishes, Taco

Peter Münster

11:37 a.m.

On Sun, Apr 13 2008, Taco Hoekwater wrote:

...

If you want existing tfms to have precedence over any afms (thereby loosing unicode support for legacy fonts) you can add this to cont-sys or the top of your input:

\ctxlua{fonts.define.method=2}

Thanks, Taco! This works. The right method for MKIV, without loosing unicode, would be even better.

...

Otherwise, you will have to extend type-urwgaramand.tex in some way that I do not quite grasp.

Extend, or perhaps replace completely. Unfortunately, my knowledge about these font-things and typescripts is about 0... Best wishes, Peter -- http://pmrb.free.fr/contact/

Henning Hraban Ramm

6:53 p.m.

Am 2008-04-13 um 13:37 schrieb Peter Münster:

...

...
Otherwise, you will have to extend type-urwgaramand.tex in some way that I do not quite grasp. Extend, or perhaps replace completely. Unfortunately, my knowledge about

On Sun, Apr 13 2008, Taco Hoekwater wrote: these font-things and typescripts is about 0...

Maybe my attached typescripts are a source of inspiration. These are for the (commercial) URW++ font families Garamond, Antiqua and Grotesk. I tried to adapt my old typescript to XeTeX/kuaTeX and ended with this subset: \starttypescript [sans] [urw-grotesk] \definefontsynonym [URWGroteskT-LighNarr] [file:u004242t] [features=default] \definefontsynonym [URWGroteskT-MediNarr] [file:u004244t] [features=default] \definefontsynonym [URWGroteskT-LighNarrObli] [file:u004262t] [features=default] \definefontsynonym [URWGroteskT-MediNarrObli] [file:u004264t] [features=default] \stoptypescript % sans urw-grotesk narrow \starttypescript [sans] [urw-grotesk] %[name] \definefontsynonym [Sans] [URWGroteskT-LighNarr] \definefontsynonym [SansItalic] [URWGroteskT-LighNarrObli] \definefontsynonym [SansBold] [URWGroteskT-MediNarr] \definefontsynonym [SansBoldItalic][URWGroteskT-MediNarrObli] \definefontsynonym [SansSlanted] [SansItalic] \definefontsynonym [SansBoldSlanted] [SansBoldItalic] \stoptypescript \starttypescript [fiee] [mix] % \definetypeface [mix] [rm] [serif] [schola] [default] [] \definetypeface [mix] [ss] [sans] [urw-grotesk] [default] [rscale=1.2] % \definetypeface [mix] [tt] [mono] [default] %[default] [] % \definetypeface [mix] [mm] [math] [helvetica] [default] [] \stoptypescript \usetypescript [fiee][mix] \setupbodyfont [mix,ss,8pt] Hans mentioned to use "compose=yes" as a feature to enable composed accented characters (for those missing in these old Type1 fonts), but I didn't try it yet. Greetlings from Lake Constance! Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer)

Wolfgang Schuster

14 Apr 14 Apr

7:13 a.m.

On Sat, Apr 12, 2008 at 9:44 AM, Peter Münster wrote:

...

Hello,

This does no more work with MKIV:

\usemodule[urwgaramond] \starttext \rm\input knuth

\it\input knuth

\bf\input knuth

\bi\input knuth \stoptext

Could anybody help me, to get urw-garamond with MKIV?

Try the following setups. \starttypescript [serif] [urwgaramond] \setups[font:fallback:serif] \definefontsynonym [Serif] [Garamond-Regular] \definefontsynonym [SerifBold] [Garamond-Medium] \definefontsynonym [SerifItalic] [Garamond-Italic] \definefontsynonym [SerifBoldItalic] [Garamond-MediumItalic] \stoptypescript \starttypescript [serif] [urwgaramond] \definefontsynonym [Garamond-Regular] [file:ugmr8a] [features=default] \definefontsynonym [Garamond-Medium] [file:ugmm8a] [features=default] \definefontsynonym [Garamond-Italic] [file:ugmri8a] [features=default] \definefontsynonym [Garamond-MediumItalic] [file:ugmmi8a] [features=default] \stoptypescript \starttypescript [urwgaramond] \definetypeface [\typescriptone] [rm] [serif] [urwgaramond] [default] \stoptypescript Wolfgang

Michael Hallgren

7:18 a.m.

New subject: ConTeXt Document with SVN Info Included

Good morning, Do we have, in userland, an already developed metod of including SVN info in a ConTeXt output file? A la svn-multi in the LaTeX world... Cheers, mh

Peter Münster

12:38 p.m.

New subject: ConTeXt Document with SVN Info Included

On Mon, Apr 14 2008, Michael Hallgren wrote:

...

Do we have, in userland, an already developed metod of including SVN info in a ConTeXt output file? A la svn-multi in the LaTeX world...

This is perhaps something, you are looking for: http://archive.contextgarden.net/message/20080403.194403.07530330.en.html (I don't know, if it's "userland", but you don't need to remake the formats ;) Cheers, Peter -- http://pmrb.free.fr/contact/

Michael Hallgren

7:42 p.m.

New subject: ConTeXt Document with SVN Info Included

Le lundi 14 avril 2008 à 14:38 +0200, Peter Münster a écrit :

...

On Mon, Apr 14 2008, Michael Hallgren wrote:

...
Do we have, in userland, an already developed metod of including SVN info in a ConTeXt output file? A la svn-multi in the LaTeX world...

This is perhaps something, you are looking for:

http://archive.contextgarden.net/message/20080403.194403.07530330.en.html

(I don't know, if it's "userland", but you don't need to remake the formats ;)

Many thanks. Looks interesting (also or in particular because of the lua piece). Cheers, mh

...

Cheers, Peter

Stephan Hennig

10:30 p.m.

New subject: ConTeXt Document with SVN Info Included

Michael Hallgren schrieb:

...

Do we have, in userland, an already developed metod of including SVN info in a ConTeXt output file? A la svn-multi in the LaTeX world...

I have not tested it with ConTeXt, but what about the vc bundle available at CTAN:support/vc? Feedback is welcome! Best regards, Stephan Hennig

Peter Münster

20 Apr 20 Apr

7:38 p.m.

On Mon, Apr 14 2008, Wolfgang Schuster wrote:

...

Try the following setups.

\starttypescript [serif] [urwgaramond] \setups[font:fallback:serif] \definefontsynonym [Serif] [Garamond-Regular] \definefontsynonym [SerifBold] [Garamond-Medium] \definefontsynonym [SerifItalic] [Garamond-Italic] \definefontsynonym [SerifBoldItalic] [Garamond-MediumItalic] \stoptypescript

\starttypescript [serif] [urwgaramond] \definefontsynonym [Garamond-Regular] [file:ugmr8a] [features=default] \definefontsynonym [Garamond-Medium] [file:ugmm8a] [features=default] \definefontsynonym [Garamond-Italic] [file:ugmri8a] [features=default] \definefontsynonym [Garamond-MediumItalic] [file:ugmmi8a] [features=default] \stoptypescript

\starttypescript [urwgaramond] \definetypeface [\typescriptone] [rm] [serif] [urwgaramond] [default] \stoptypescript

Hello Wolfgang, I tried: % engine=luatex [ your setup ] \usetypescript[urwgaramond] \setupbodyfont[urwgaramond] \starttext \rm\input knuth \it\input knuth \bf\input knuth \bi\input knuth \stoptext But unfortnuatly only rectangles instead of letters in the pdf... Cheers, Peter -- http://pmrb.free.fr/contact/

Wolfgang Schuster

21 Apr 21 Apr

6:25 a.m.

On Sun, Apr 20, 2008 at 9:38 PM, Peter Münster wrote:

...

On Mon, Apr 14 2008, Wolfgang Schuster wrote:

...
Try the following setups.

\starttypescript [serif] [urwgaramond] \setups[font:fallback:serif] \definefontsynonym [Serif] [Garamond-Regular] \definefontsynonym [SerifBold] [Garamond-Medium] \definefontsynonym [SerifItalic] [Garamond-Italic] \definefontsynonym [SerifBoldItalic] [Garamond-MediumItalic] \stoptypescript

\starttypescript [serif] [urwgaramond] \definefontsynonym [Garamond-Regular] [file:ugmr8a] [features=default] \definefontsynonym [Garamond-Medium] [file:ugmm8a] [features=default] \definefontsynonym [Garamond-Italic] [file:ugmri8a] [features=default] \definefontsynonym [Garamond-MediumItalic] [file:ugmmi8a] [features=default] \stoptypescript

\starttypescript [urwgaramond] \definetypeface [\typescriptone] [rm] [serif] [urwgaramond] [default] \stoptypescript

Hello Wolfgang,

I tried:

% engine=luatex

[ your setup ]

\usetypescript[urwgaramond] \setupbodyfont[urwgaramond]

\starttext \rm\input knuth

\it\input knuth

\bf\input knuth

\bi\input knuth \stoptext

But unfortnuatly only rectangles instead of letters in the pdf...

Hi Peter, I tried yesterday to use the type1 of the luximono fonts with MkIV and got myself weird results in the output. I'm don't what the correct way to use type1 fonts in MkIV without map files is but Hans should be able to tell use this. Wolfgang

Hans Hagen

7:17 a.m.

Wolfgang Schuster wrote:

...

On Sun, Apr 20, 2008 at 9:38 PM, Peter Münster wrote:

...
On Mon, Apr 14 2008, Wolfgang Schuster wrote:

...
Try the following setups.

\starttypescript [serif] [urwgaramond] \setups[font:fallback:serif] \definefontsynonym [Serif] [Garamond-Regular] \definefontsynonym [SerifBold] [Garamond-Medium] \definefontsynonym [SerifItalic] [Garamond-Italic] \definefontsynonym [SerifBoldItalic] [Garamond-MediumItalic] \stoptypescript

\starttypescript [serif] [urwgaramond] \definefontsynonym [Garamond-Regular] [file:ugmr8a] [features=default] \definefontsynonym [Garamond-Medium] [file:ugmm8a] [features=default] \definefontsynonym [Garamond-Italic] [file:ugmri8a] [features=default] \definefontsynonym [Garamond-MediumItalic] [file:ugmmi8a] [features=default] \stoptypescript

\starttypescript [urwgaramond] \definetypeface [\typescriptone] [rm] [serif] [urwgaramond] [default] \stoptypescript Hello Wolfgang,

I tried:

% engine=luatex

[ your setup ]

\usetypescript[urwgaramond] \setupbodyfont[urwgaramond]

\starttext \rm\input knuth

\it\input knuth

\bf\input knuth

\bi\input knuth \stoptext

But unfortnuatly only rectangles instead of letters in the pdf...

Hi Peter,

I tried yesterday to use the type1 of the luximono fonts with MkIV and got myself weird results in the output.

I'm don't what the correct way to use type1 fonts in MkIV without map files is but Hans should be able to tell use this.

do you have the afm files? mkiv does not use the tfm, just the afm and pfb ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

Wolfgang Schuster

7:41 a.m.

On Mon, Apr 21, 2008 at 9:17 AM, Hans Hagen wrote:

...

Wolfgang Schuster wrote:

...
On Sun, Apr 20, 2008 at 9:38 PM, Peter Münster wrote:

...
On Mon, Apr 14 2008, Wolfgang Schuster wrote:

...
Try the following setups.

\starttypescript [serif] [urwgaramond] \setups[font:fallback:serif] \definefontsynonym [Serif] [Garamond-Regular] \definefontsynonym [SerifBold] [Garamond-Medium] \definefontsynonym [SerifItalic] [Garamond-Italic] \definefontsynonym [SerifBoldItalic] [Garamond-MediumItalic] \stoptypescript

\starttypescript [serif] [urwgaramond] \definefontsynonym [Garamond-Regular] [file:ugmr8a] [features=default] \definefontsynonym [Garamond-Medium] [file:ugmm8a] [features=default] \definefontsynonym [Garamond-Italic] [file:ugmri8a] [features=default] \definefontsynonym [Garamond-MediumItalic] [file:ugmmi8a] [features=default] \stoptypescript

\starttypescript [urwgaramond] \definetypeface [\typescriptone] [rm] [serif] [urwgaramond] [default] \stoptypescript Hello Wolfgang,

I tried:

% engine=luatex

[ your setup ]

\usetypescript[urwgaramond] \setupbodyfont[urwgaramond]

\starttext \rm\input knuth

\it\input knuth

\bf\input knuth

\bi\input knuth \stoptext

But unfortnuatly only rectangles instead of letters in the pdf...

Hi Peter,

I tried yesterday to use the type1 of the luximono fonts with MkIV and got myself weird results in the output.

I'm don't what the correct way to use type1 fonts in MkIV without map files is but Hans should be able to tell use this.

do you have the afm files?

mkiv does not use the tfm, just the afm and pfb

I used myself for the luximono fonts only the afm and pfb files and put them in my texmf-fonts directory, the chars had been also shown in the pdf file but the last char in the uppercase, the lowercase char and from the number had been replaced by the wrong glyph. I will send tomorrow my typescripts with the pdf file I get from my test file. Wolfgang

Hans Hagen

8:05 a.m.

Wolfgang Schuster wrote:

...

I used myself for the luximono fonts only the afm and pfb files and put them in my texmf-fonts directory, the chars had been also shown in the pdf file but the last char in the uppercase, the lowercase char and from the number had been replaced by the wrong glyph.

hm, there are no afm files on my system, kind of weird because afm files are the sources for tfm and as such they should be shipped Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

Wolfgang Schuster

8:25 a.m.

On Mon, Apr 21, 2008 at 10:05 AM, Hans Hagen wrote:

...

Wolfgang Schuster wrote:

...
I used myself for the luximono fonts only the afm and pfb files and put them in my texmf-fonts directory, the chars had been also shown in the pdf file but the last char in the uppercase, the lowercase char and from the number had been replaced by the wrong glyph.

hm, there are no afm files on my system, kind of weird because afm files are the sources for tfm and as such they should be shipped

I used the zip file from ctan, it contains afm files http://ctan.org/tex-archive/fonts/LuxiMono/ I wrote now a typescript with a few example line. \starttypescript [mono] [luximono] \setups[font:fallback:mono] \definefontsynonym [Mono] [LuxiMono-Regular] \definefontsynonym [MonoBold] [LuxiMono-Bold] \definefontsynonym [MonoItalic] [LuxiMono-Italic] \definefontsynonym [MonoBoldItalic] [LuxiMono-BoldItalic] \stoptypescript \starttypescript [mono] [luximono] \definefontsynonym [LuxiMono-Bold] [file:ul9b8a] [features=default] \definefontsynonym [LuxiMono-BoldItalic] [file:ul9bo8a] [features=default] \definefontsynonym [LuxiMono-Regular] [file:ul9r8a] [features=default] \definefontsynonym [LuxiMono-Italic] [file:ul9ro8a] [features=default] \stoptypescript \starttypescript [luximono] \definetypeface [\typescriptone] [tt] [mono] [luximono] [default] \stoptypescript \usetypescript[luximono] \setupbodyfont[luximono] \starttext ABC %ABCDE abc 1230 \stoptext The last char in every row is always replaced by something else or to be more concrete the last char for the uppercase row is replaced by a uppercase thorn, the last char for the lowercase chars with a lowercase thorn and the last char for the digits depend what other chars I used in my test file. Wolfgang

Hans Hagen

8:22 a.m.

about garamond - forget about the files in the tex tree, a mess - the type 1 tarbal from urw: luatex crashesd on them - the truetype from urw: \definefontfeature[complete][liga=yes,kern=yes,compose=yes,tlig=yes,trep=yes] \starttypescript [serif] [urwgaramond] \setups[font:fallback:serif] \definefontsynonym [Serif] [Garamond-Regular] \definefontsynonym [SerifBold] [Garamond-Medium] \definefontsynonym [SerifItalic] [Garamond-Italic] \definefontsynonym [SerifBoldItalic] [Garamond-MediumItalic] \stoptypescript % crashed luatex \starttypescript [serif] [urwgaramond] \definefontsynonym [Garamond-Regular] [file:g043003t] [features=complete] \definefontsynonym [Garamond-Medium] [file:g043004t] [features=complete] \definefontsynonym [Garamond-Italic] [file:g043023t] [features=complete] \definefontsynonym [Garamond-MediumItalic] [file:g043024t] [features=complete] \stoptypescript % works ok \starttypescript [serif] [urwgaramond] \definefontsynonym [Garamond-Regular] [file:GaramondNo8-Reg] [features=complete] \definefontsynonym [Garamond-Medium] [file:GaramondNo8-Med] [features=complete] \definefontsynonym [Garamond-Italic] [file:GaramondNo8-Ita] [features=complete] \definefontsynonym [Garamond-MediumItalic] [file:GaramondNo8-MedIta] [features=complete] \stoptypescript \starttypescript [urwgaramond] \definetypeface [\typescriptone] [rm] [serif] [urwgaramond] [default] \stoptypescript \usetypescript[urwgaramond] \setupbodyfont[urwgaramond] ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

Lutz Haseloff

11:05 a.m.

Hi Hans, hi all, is there a way to get the type1 LucidaBright fonts working in LuaTeX/MKIV? I put the afm and pfb into the tree. --------------- \usetypescript [lucida] [texnansi] \switchtotypeface [lucida] [9pt] --------------- from showfont results in latinmodern. My try to use --------------- \font\test=lbr*default\test \starttext ABC abc 123 \stoptext --------------- loads the afm, shows LucidaBright, but the same strange output in pdf as described in Wolfgang's mails. Greetings from Potsdam Lutz 2008/4/21, Hans Hagen :

...

about garamond

- forget about the files in the tex tree, a mess

- the type 1 tarbal from urw: luatex crashesd on them

- the truetype from urw:

\definefontfeature[complete][liga=yes,kern=yes,compose=yes,tlig=yes,trep=yes]

\starttypescript [serif] [urwgaramond] \setups[font:fallback:serif] \definefontsynonym [Serif] [Garamond-Regular] \definefontsynonym [SerifBold] [Garamond-Medium] \definefontsynonym [SerifItalic] [Garamond-Italic] \definefontsynonym [SerifBoldItalic] [Garamond-MediumItalic] \stoptypescript

% crashed luatex

\starttypescript [serif] [urwgaramond] \definefontsynonym [Garamond-Regular] [file:g043003t] [features=complete] \definefontsynonym [Garamond-Medium] [file:g043004t] [features=complete] \definefontsynonym [Garamond-Italic] [file:g043023t] [features=complete] \definefontsynonym [Garamond-MediumItalic] [file:g043024t] [features=complete] \stoptypescript

% works ok

\starttypescript [serif] [urwgaramond] \definefontsynonym [Garamond-Regular] [file:GaramondNo8-Reg] [features=complete] \definefontsynonym [Garamond-Medium] [file:GaramondNo8-Med] [features=complete] \definefontsynonym [Garamond-Italic] [file:GaramondNo8-Ita] [features=complete] \definefontsynonym [Garamond-MediumItalic] [file:GaramondNo8-MedIta] [features=complete]

\stoptypescript

\starttypescript [urwgaramond] \definetypeface [\typescriptone] [rm] [serif] [urwgaramond] [default] \stoptypescript

\usetypescript[urwgaramond] \setupbodyfont[urwgaramond]

----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________

If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________

Hans Hagen

11:54 a.m.

Lutz Haseloff wrote:

...

Hi Hans, hi all,

is there a way to get the type1 LucidaBright fonts working in LuaTeX/MKIV? I put the afm and pfb into the tree. --------------- \usetypescript [lucida] [texnansi] \switchtotypeface [lucida] [9pt] --------------- from showfont results in latinmodern.

My try to use --------------- \font\test=lbr*default\test \starttext

ABC

abc

123

\stoptext --------------- loads the afm, shows LucidaBright, but the same strange output in pdf as described in Wolfgang's mails.

do you use the latest luatex? Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

Lutz Haseloff

12:06 p.m.

2008/4/21, Hans Hagen :

...

Lutz Haseloff wrote:

...
Hi Hans, hi all,

is there a way to get the type1 LucidaBright fonts working in LuaTeX/MKIV? I put the afm and pfb into the tree. --------------- \usetypescript [lucida] [texnansi] \switchtotypeface [lucida] [9pt] --------------- from showfont results in latinmodern.

My try to use --------------- \font\test=lbr*default\test \starttext

ABC

abc

123

\stoptext --------------- loads the afm, shows LucidaBright, but the same strange output in pdf as described in Wolfgang's mails.

do you use the latest luatex?

This is LuaTeX, Version snapshot-0.25.3-2008042009 I tried both 0.25.3 from w32tex and from http://foundry.supelec.fr/, my ConTeXt is ConTeXt ver: 2008.04.18 14:17 MKIV fmt: 2008.4.21 int: english/english It's curious, if i copy and paste the strange text from the pdf into my editor all glyphs are the right ones. Greetings Lutz

...

Hans

Taco Hoekwater

5:47 p.m.

Lutz Haseloff wrote:

...

2008/4/21, Hans Hagen :

...
Lutz Haseloff wrote:

...
Hi Hans, hi all,

is there a way to get the type1 LucidaBright fonts working in LuaTeX/MKIV? I put the afm and pfb into the tree. --------------- \usetypescript [lucida] [texnansi] \switchtotypeface [lucida] [9pt] --------------- from showfont results in latinmodern.

My try to use --------------- \font\test=lbr*default\test \starttext

ABC

abc

123

\stoptext --------------- loads the afm, shows LucidaBright, but the same strange output in pdf as described in Wolfgang's mails.

do you use the latest luatex?

This is LuaTeX, Version snapshot-0.25.3-2008042009

I tried both 0.25.3 from w32tex and from http://foundry.supelec.fr/, my ConTeXt is ConTeXt ver: 2008.04.18 14:17 MKIV fmt: 2008.4.21 int: english/english

It's curious, if i copy and paste the strange text from the pdf into my editor all glyphs are the right ones.

Let's wait for Wolfgang's files. The fact that copy and paste works means that the /ToUnicode mappings are good, just the wrong actual glyph is used. Put another way: if that did not work, then there would have been two bugs instead of one. Best wishes, Taco

Wolfgang Schuster

22 Apr 22 Apr

6:07 a.m.

Hi,

...

...
It's curious, if i copy and paste the strange text from the pdf into my editor all glyphs are the right ones.

Let's wait for Wolfgang's files. The fact that copy and paste works means that the /ToUnicode mappings are good, just the wrong actual glyph is used. Put another way: if that did not work, then there would have been two bugs instead of one.

The same bahviour on my side as Lutz has, copy and paste is possible and the correct text is shown in my editor from the output the text in the PDF file is wrong. The uppercase and lowercase chars and numbers except of the last one of them in text are correct but umlauts and other chars are wrong. I put the pdf files from my TeX run online (LuaTeX 0.25.3), sorry no log files. http://schuster.wolfgang.googlepages.com/files Wolfgang

Taco Hoekwater

6:52 a.m.

Wolfgang Schuster wrote:

...

Hi,

The uppercase and lowercase chars and numbers except of the last one of them in text are correct but umlauts and other chars are wrong.

I put the pdf files from my TeX run online (LuaTeX 0.25.3), sorry no log files.

I was able to reproduce the bug (so halfway there). More later. Best wishes, Taco

Taco Hoekwater

10:43 a.m.

Taco Hoekwater wrote:

...

Wolfgang Schuster wrote:

...
Hi,

The uppercase and lowercase chars and numbers except of the last one of them in text are correct but umlauts and other chars are wrong.

I put the pdf files from my TeX run online (LuaTeX 0.25.3), sorry no log files.

I was able to reproduce the bug (so halfway there). More later.

I've created a temporary fix and written a bit of an explanation here: http://tracker.luatex.org/view.php?id=27 The current repository version now runs the test files reasonably well. Best wishes, Taco

Lutz Haseloff

23 Apr 23 Apr

10:36 a.m.

Hi Taco, Hi all, with the brandnew luatex (build 1186) there is no glyph to be seen in the pdf but i can copy and paste the invisible text into my texteditor. the log: snip (C:/tex/texmf-context/tex/context/base/spec-fdf.tex (C:/tex/texmf-context/tex/context/base/spec-fdf.mkiv)) specials : fdf loaded ) specials : fdf loaded ) report >> afm glyph: assigning private slot 0xF0000 for unknown glyph name twosuperior report >> afm glyph: assigning private slot 0xF0001 for unknown glyph name threesuperior report >> afm glyph: assigning private slot 0xF0002 for unknown glyph name fl report >> afm glyph: assigning private slot 0xF0003 for unknown glyph name nbspace report >> afm glyph: assigning private slot 0xF0004 for unknown glyph name fi report >> afm glyph: assigning private slot 0xF0005 for unknown glyph name ffl report >> afm glyph: assigning private slot 0xF0006 for unknown glyph name sfthyphen report >> afm glyph: assigning private slot 0xF0007 for unknown glyph name onesuperior report >> afm glyph: assigning private slot 0xF0008 for unknown glyph name ff report >> afm glyph: assigning private slot 0xF0009 for unknown glyph name ffi report >> afm glyph: assigning private slot 0xF000A for unknown glyph name dotlessj report >> load afm: file size: 0 report >> load afm: saving: in cache (./afmtest.tuo) (./afmtest.tuo) systems : begin file afmtest at line 3 (C:/tex/texmf-context/tex/context/sample/tufte.tex) fonts : resetting map file list {C:/tex/texmf-context/fonts/map/pdftex/context/original-empty.map} fonts : using map file: original-base {C:/tex/texmf-context/fonts/map/pdftex/context/original-base.map} fonts : using map file: lm-math {C:/tex/texmf/fonts/map/dvips/lm/lm-math.map} fonts : using map file: lm-rm {C:/tex/texmf/fonts/map/dvips/lm/lm-rm.map} fonts : using map file: original-ams-base {C:/tex/texmf-context/fonts/map/pdftex/context/original-ams-base.map} fonts : using map file: original-ams-euler {C:/tex/texmf-context/fonts/map/pdftex/context/original-ams-euler.map} fonts : using map file: original-public-lm {C:/tex/texmf-context/fonts/map/pdftex/context/original-public-lm.map} [1.1] systems : end file afmtest at line 13 ) mkiv lua stats : used config path - C:/tex/texmf-local/web2c/texmf.cnf;C:/tex/texmf-context/web2c/texmf.cnf;C:/tex/texmf/web2c/texmf.cnf mkiv lua stats : used cache path - C:/tex/texmf-cache/luatex-cache/context/71ddae2d1527093aac63e0e1aa139641 mkiv lua stats : modules/dumps/instances - 84/20/1 mkiv lua stats : input load time - 0.031 seconds mkiv lua stats : fonts load time - 1.172 seconds mkiv lua stats : xml load time - 0.000 seconds, backreferences: 0, outer filtering time: 0.000 mkiv lua stats : mps conversion time - 0.000 seconds mkiv lua stats : node processing time - 0.000 seconds (including kernel) mkiv lua stats : kernel processing time - 0.000 seconds mkiv lua stats : attribute processing time - 0.000 seconds mkiv lua stats : language load time - 0.031 seconds, n=2 mkiv lua stats : graphics processing time - 0.000 seconds, n=0 (including tex) mkiv lua stats : metapost processing time - 0.000 seconds, loading: 0.000 seconds, execution: 0.000 seconds, n: 0 mkiv lua stats : current memory usage - 50611369 bytes mkiv lua stats : cleaned up reserved nodes - 16 nodes, 8 lists of 100 mkiv lua stats : node memory usage - 20 glue_spec, 2 dir mkiv lua stats : loaded patterns - en:en:pat:exc:2 mkiv lua stats : loaded fonts - file:lmroman10-bolditalic*default:otf file:lmroman10-italic*default:otf file:lmroman12-bold*default:otf file:lmroman12-italic*default:otf file:lmroman12-regular*default:otf file:lmroman7-bold*default:otf file:lmroman7-regular*default:otf file:lmroman9-bold*default:otf file:lmroman9-italic*default:otf file:lmroman9-regular*default:otf file:lmromancaps10-regular*default:otf file:lmromanslant10-bold*default:otf file:lmromanslant10-regular*default:otf file:lmromanslant12-regular*default:otf file:lmromanslant9-regular*default:otf lbr*default:afm lmex10:tfm lmmi12:tfm lmmi7:tfm lmmi9:tfm lmsy10:tfm lmsy7:tfm lmsy9:tfm msam10:tfm msam7:tfm msbm10:tfm msbm7:tfm rm-lmr12:tfm rm-lmr7:tfm rm-lmr9:tfm mkiv lua stats : runtime - 2.094 seconds, 1 processed pages, 1 shipped pages, 0.478 pages/second snip Greetings Lutz 2008/4/22, Taco Hoekwater :

...

Taco Hoekwater wrote:

...
Wolfgang Schuster wrote:

...
Hi,

The uppercase and lowercase chars and numbers except of the last one of them in text are correct but umlauts and other chars are wrong.

I put the pdf files from my TeX run online (LuaTeX 0.25.3), sorry no log files.

I was able to reproduce the bug (so halfway there). More later.

I've created a temporary fix and written a bit of an explanation here:

http://tracker.luatex.org/view.php?id=27

The current repository version now runs the test files reasonably well.

Best wishes, Taco ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________

Taco Hoekwater

12:34 p.m.

Lutz Haseloff wrote:

...

Hi Taco, Hi all,

with the brandnew luatex (build 1186) there is no glyph to be seen in the pdf but i can copy and paste the invisible text into my texteditor.

Should be fixed in #1187. Best wishes, Taco

Peter Münster

21 Apr 21 Apr

7:38 p.m.

On Mon, Apr 21 2008, Hans Hagen wrote:

...

% works ok

\starttypescript [serif] [urwgaramond] \definefontsynonym [Garamond-Regular] [file:GaramondNo8-Reg] [features=complete] \definefontsynonym [Garamond-Medium] [file:GaramondNo8-Med] [features=complete] \definefontsynonym [Garamond-Italic] [file:GaramondNo8-Ita] [features=complete] \definefontsynonym [Garamond-MediumItalic] [file:GaramondNo8-MedIta] [features=complete] \stoptypescript

\starttypescript [urwgaramond] \definetypeface [\typescriptone] [rm] [serif] [urwgaramond] [default] \stoptypescript

\usetypescript[urwgaramond] \setupbodyfont[urwgaramond]

Hello Hans, What exactly works ok? I tried the above lines, but I get the lm-font in the pdf. And when replacing "Garamond-Regular" with "Serif" and so on, luatex crashes here too. 2 messages that are perhaps helpful: report >> load otf: loading: /opt/TeX-live/texmf-local/fonts/truetype/public/urw/GaramondNo8-Ita.ttf report >> load otf: warning: Glyph 632 is called ".notdef", a singularly inept choice of name (only glyph 0 may be called .notdef) Cheers, Peter -- http://pmrb.free.fr/contact/

6111

Age (days ago)

6122

Last active (days ago)

List overview

Download

25 comments

8 participants

participants (8)

Hans Hagen
Henning Hraban Ramm
Lutz Haseloff
Michael Hallgren
Peter Münster
Stephan Hennig
Taco Hoekwater
Wolfgang Schuster