Toward the use of inleft for custom section's command… or not…
Hello there, Thanks to a hdd crash, I need to rewrite an old document of mine from scratch (after setting up a software RAID on my machine). Unfortunately, I let my ConTeXt faculties to rust… I must deal with several problems (but I will apply the good old divide and conquer rule). So, here is a collection of unforgivable workarounds to produce what I want to: −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− \enableregime[utf8] \setuppapersize[A4][A4] \setupbodyfont[10pt] \setuplayout[reset] \setuplayout[ location=singlesided, leftedge=0mm, leftmargin=45mm, rightedge=0mm, rightmargin=0mm, backspace=60mm, topspace=10mm, bottomspace=10mm, header=0mm, headerdistance=0mm, footer=0mm, footerdistance=0mm, margindistance=0mm, height=fit, width=fit, grid=yes] \setuppagenumbering[state=stop] \setupinmargin[style=normal,align=outer] \define[1]\SectionCommand { \blank % just because I always need some vertical space just before my Section \inleft{\bfa #1} {\line{\leaders\hbox{\vrule width 1pt height .5\strutht depth -\dimexpr.5\strutht-\linewidth\relax} \hfil}} \blank[-1*big] % Are you kidding me with that negative blank??? } \define[4]\TopicCommand { \inleft{{\em #1}}{\bfa #2 \hfill \tfx #3} % \crlf % OK, give me a newline! But, the problem is that there is a big % % after space from inleft! \blank[-1*big] % REALLY DUMMY WORKAROUND!!! {\em #4} } \starttext \SectionCommand{A Section} \TopicCommand{The date}{Knuth's topic}{some text}{The detailled topic (more than one line)} \input knuth \blank % Are you kidding me??? \TopicCommand{Another date}{Zapf}{some text}{The detailled topic (more than one line)} \input zapf \SectionCommand{Section} \TopicCommand{A date}{Tufte}{}{Some details} \input tufte \stoptext −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− OK, I need that… but a clean version… Best Regards, Renaud
Since my previous post doesn't seem inspiring at all (sniff), here is a simplified and more precise description of what need to be done: 1 − I need a full textwidth black line as separator with a short title centered vertically at left 2 − This separator must be followed by text, and the inbetween vertical space must be configurable (i.e. .5lineheight or a full lineheight doesn't satisfy me) My first idea has been to combine a vertically centered line with inleft or inmargin but that introduces an annoying afterspace… Another idea could be to combine some \hairlines or full textwidth fillinline but then don't know how to vertically align my inmargin text… −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− TEST \setuplayout[reset] \setuplayout[ location=singlesided, leftedge=0mm, leftmargin=25mm, rightedge=0mm, rightmargin=0mm, backspace=40mm, topspace=10mm, bottomspace=10mm, header=0mm, headerdistance=0mm, footer=0mm, footerdistance=0mm, margindistance=0mm, height=fit, width=fit, grid=yes] \setuppagenumbering[state=stop] \setupinmargin[style=normal,align=outer] \starttext \inmargin{blurp}{\line{\leaders\hbox{\vrule width 1pt height .5\strutht depth -\dimexpr.5\strutht-\linewidth\relax} \hfil}} This is not a test \stoptext −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
Am 25.11.2010 um 21:27 schrieb Renaud AUBIN:
Since my previous post doesn't seem inspiring at all (sniff), here is a simplified and more precise description of what need to be done:
[...]
\setupbodyfont[10pt] \setuplayout [leftedge=0mm, leftmargin=45mm, rightedge=0mm, rightmargin=0mm, backspace=60mm, topspace=10mm, bottomspace=10mm, header=0mm, headerdistance=0mm, footer=0mm, footerdistance=0mm, margindistance=0mm, height=middle, width=middle, grid=yes] \setuppagenumbering[state=stop] \setuphead[section] [style=,command=\SectionCommand] \setuphead[subsection][style=,command=\SubsectionCommand] \define[2]\SectionCommand {\inleftmargin{\leftaligned{\structuretitle}}% \blackrule [ width=\textwidth, height=+.3\lineheight, depth=-.2\lineheight]} \define[2]\SubsectionCommand {\vbox\bgroup \inleftmargin{\leftaligned{\em\structureuservariable{date}}}% {\bfa\structuretitle}\wordright{\tfx\structureuservariable{topic}} \blank {\em\structureuservariable{info}}% \egroup} \starttext \startsection[title={A Section}] \startsubsection [title={The detailled topic (which takes more than one line)}] [date={The date},topic={Knuth’s topic},info={some text}] \input knuth \stopsubsection \startsubsection [title={The detailled topic (which takes more than one line)}] [date={Another date},topic={Zapf},info={some text}] \input zapf \stopsubsection \stopsection \startsection[title={Section}] \startsubsection [title={Some details}] [date={A date},topic={Tufte}] \input tufte \stopsubsection \stopsection \stoptext Wolfgang
Hi Wolfgang, First, thank you! Now, if I use some accentuated letters in title (the É just after the second subsection and before \input zapf), there is an unwanted vertical space… Bug, feature or misuse??? Could you confirm the bug? (the resulting pdf: http://dl.dropbox.com/u/5289718/testWolfgang.pdf) I use the latest minimals on debian 64. Test −−−−−−−−−−−−−−−−−−−−−−−−−−−−−− \setupbodyfont[10pt] \setuplayout [leftedge=0mm, leftmargin=45mm, rightedge=0mm, rightmargin=0mm, backspace=60mm, topspace=10mm, bottomspace=10mm, header=0mm, headerdistance=0mm, footer=0mm, footerdistance=0mm, margindistance=0mm, height=middle, width=middle, grid=yes] \setuppagenumbering[state=stop] \setuphead[section] [style=,command=\SectionCommand] \setuphead[subsection][style=,command=\SubsectionCommand] \define[2]\SectionCommand {\inleftmargin{\leftaligned{\structuretitle}}% \blackrule [ width=\textwidth, height=+.3\lineheight, depth=-.2\lineheight]} \define[2]\SubsectionCommand {\vbox\bgroup \inleftmargin{\leftaligned{\em\structureuservariable{date}}}% {\bfa\structuretitle}\wordright{\tfx\structureuservariable{topic}} % \blank {\em\structureuservariable{info}}% \egroup} \starttext \startsection[title={A Section}] \startsubsection [title={The detailled topic (which takes more than one line)}] [date={The date},topic={Knuth’s topic},info={some text}] \input knuth \stopsubsection \startsubsection [title={Éhe detailled topic (which takes more than one line)}] [date={Another date},topic={Zapf},info={some text}] É \input zapf \stopsubsection \startsubsection [title={The detailled topic (which takes more than one line)}] [date={Another date},topic={Zapf},info={some text}] \input zapf \stopsubsection \stopsection \startsection[title={Section}] \startsubsection [title={Some details}] [date={A date},topic={Tufte}] \input tufte \stopsubsection \stopsection \stoptext −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
Ok, that seems to be due to grid=yes… Le 26/11/2010 20:25, Renaud AUBIN a écrit :
\setupbodyfont[10pt]
\setuplayout [leftedge=0mm, leftmargin=45mm, rightedge=0mm, rightmargin=0mm, backspace=60mm, topspace=10mm, bottomspace=10mm, header=0mm, headerdistance=0mm, footer=0mm, footerdistance=0mm, margindistance=0mm, height=middle, width=middle, grid=yes]
\setuppagenumbering[state=stop]
\setuphead[section] [style=,command=\SectionCommand] \setuphead[subsection][style=,command=\SubsectionCommand]
\define[2]\SectionCommand {\inleftmargin{\leftaligned{\structuretitle}}% \blackrule [ width=\textwidth, height=+.3\lineheight, depth=-.2\lineheight]}
\define[2]\SubsectionCommand {\vbox\bgroup \inleftmargin{\leftaligned{\em\structureuservariable{date}}}% {\bfa\structuretitle}\wordright{\tfx\structureuservariable{topic}} % \blank {\em\structureuservariable{info}}% \egroup}
\starttext
\startsection[title={A Section}]
\startsubsection [title={The detailled topic (which takes more than one line)}] [date={The date},topic={Knuth’s topic},info={some text}]
\input knuth
\stopsubsection
\startsubsection [title={Éhe detailled topic (which takes more than one line)}] [date={Another date},topic={Zapf},info={some text}]
É \input zapf
\stopsubsection
\startsubsection [title={The detailled topic (which takes more than one line)}] [date={Another date},topic={Zapf},info={some text}]
\input zapf
\stopsubsection
\stopsection
\startsection[title={Section}]
\startsubsection [title={Some details}] [date={A date},topic={Tufte}]
\input tufte
\stopsubsection
\stopsection
\stoptext
Thanks to Wolfgang and Renaud for sharing all this… However, Renaud, I didn't notice what you says about having « É » in the title: it seems that everything works as expected: see http://dl.dropbox.com/u/4316076/inmargin-fullwidth-1.pdf (using, ConTeXt ver: 2010.11.26 22:49 MKIV, on MacOS 10.6.5). Best regards: OK On 26 nov. 2010, at 20:25, Renaud AUBIN wrote:
Hi Wolfgang,
First, thank you!
Now, if I use some accentuated letters in title (the É just after the second subsection and before \input zapf), there is an unwanted vertical space… Bug, feature or misuse??? Could you confirm the bug? (the resulting pdf: http://dl.dropbox.com/u/5289718/testWolfgang.pdf)
I use the latest minimals on debian 64.
Test −−−−−−−−−−−−−−−−−−−−−−−−−−−−−− \setupbodyfont[10pt]
\setuplayout [leftedge=0mm, leftmargin=45mm, rightedge=0mm, rightmargin=0mm, backspace=60mm, topspace=10mm, bottomspace=10mm, header=0mm, headerdistance=0mm, footer=0mm, footerdistance=0mm, margindistance=0mm, height=middle, width=middle, grid=yes]
\setuppagenumbering[state=stop]
\setuphead[section] [style=,command=\SectionCommand] \setuphead[subsection][style=,command=\SubsectionCommand]
\define[2]\SectionCommand {\inleftmargin{\leftaligned{\structuretitle}}% \blackrule [ width=\textwidth, height=+.3\lineheight, depth=-.2\lineheight]}
\define[2]\SubsectionCommand {\vbox\bgroup \inleftmargin{\leftaligned{\em\structureuservariable{date}}}% {\bfa\structuretitle}\wordright{\tfx\structureuservariable{topic}} % \blank {\em\structureuservariable{info}}% \egroup}
\starttext
\startsection[title={A Section}]
\startsubsection [title={The detailled topic (which takes more than one line)}] [date={The date},topic={Knuth’s topic},info={some text}]
\input knuth
\stopsubsection
\startsubsection [title={Éhe detailled topic (which takes more than one line)}] [date={Another date},topic={Zapf},info={some text}]
É \input zapf
\stopsubsection
\startsubsection [title={The detailled topic (which takes more than one line)}] [date={Another date},topic={Zapf},info={some text}]
\input zapf
\stopsubsection
\stopsection
\startsection[title={Section}]
\startsubsection [title={Some details}] [date={A date},topic={Tufte}]
\input tufte
\stopsubsection
\stopsection
\stoptext
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________
%%%%%%%%%%%%%%%%%% Otared Kavian Département de Mathématiques Université de Versailles Saint-Quentin Bâtiment Fermat 45 aveue des Etats Unis 78035 Versailles cedex Téléphone: +33 1 39 25 46 42 Secrétariat: +33 1 39 25 46 44 Secrétariat: +33 1 39 25 46 46 e-mail: Otared.Kavian@math.uvsq.fr
Am 27.11.2010 um 09:17 schrieb Otared Kavian:
Thanks to Wolfgang and Renaud for sharing all this…
However, Renaud, I didn't notice what you says about having « É » in the title: it seems that everything works as expected: see http://dl.dropbox.com/u/4316076/inmargin-fullwidth-1.pdf
He means the space between the header and the following paragraph, he can fix this by changing the interlinespace, e.g. \setupinterlinespace[height=.8,depth=.2] or \setupinterlinespace[line=3ex] He can also try if a different grid option give the correct output without changing the interlinespace. Wolfgang
Thanks to Wolgang and Otared, My initial problem has disappeared using the latest beta 2010.11.26 22:49. I don't really know why but it works ;) By the way, in the mean time, I've fixed that using the default grid policy (i.e. removing grid=yes in setuplayout). Cheers, Renaud Le 27/11/2010 09:57, Wolfgang Schuster a écrit :
He can also try if a different grid option give the correct output without changing the interlinespace.
participants (3)
-
Otared Kavian -
Renaud AUBIN -
Wolfgang Schuster