Thanx Hans for reply. A few hours I was looking for a problem in my source file and library that load at the beginning of my file. It seems that the problem has nothing to do with the error message means that it has not nothing to do with the itemize environment nor setupitemize (nothing like this in the file does not resp. when sections of code to comment out these environments, so nothing changes). The problem probably is related to some a side effect, because in older versions of ConTeXt Standalone not appear (and does not appear in Context, which is included in the latest distribution TeXLive 2014). In my library are very old pieces of code that I used many years ago in plainTEX in combination with ConTeXtovým code (including frequent use \setvariables). Unfortunately I was despite my great efforts failed to create a "reasonable" minimal example, so I'll probably have to wait some time until someone else runs into a similar problem and will be able to describe properly document and create a minimum sample example (already with me it happened several times and each time it finally was resolved). Thanks for your interest Jaroslav Hajtmar Dne 18.10.2014 11:40, Hans Hagen napsal(a):

On 10/18/2014 9:14 AM, Jaroslav Hajtmar wrote:

...

Hello ConTeXist.... Already a long time I use ConTeXt for processing the same files and always worked very well. Yesterday I updated version of ConTeXt Standalone and then I (like many times before) wanted to translate his usual document. Unfortunately, the translation stopped with an error message that I do not understand. Does anyone know what this could mean? The source code of my source file I did not change for a very long time a translation by using ConTeXt from TeXLive 2014 is without problem. Thanks for the advice. Jaroslav Hajtmar

Here is error message.

C:\$~1da\PODNIK\ConTeXt>context Ds477_2202421

mtx-context | warning: no (local) file './Ds477_2202421', proceeding mtx-context | run 1: luatex --fmt="C:/context/tex/texmf-cache/luatex-cache/c ontext/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en" --jobname="Ds477 _2202421" --lua="C:/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce 0dde776fb1556f32e/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentr un=1 --c:fulljobname="./Ds477_2202421" --c:input="./Ds477_2202421" --c:kindofrun =1 --c:maxnofruns=8 "cont-yes.mkiv" This is LuaTeX, Version beta-0.79.1 (TeX Live 2014/W32TeX) (rev 5041) \write18 enabled. open source > 1 > 1 > C:/context/tex/texmf-context/tex/context/base/cont-yes .mkiv

ConTeXt ver: 2014.09.25 18:58 MKIV beta fmt: 2014.10.18 int: english/english

system > 'cont-new.mkiv' loaded open source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new .mkiv close source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new .mkiv system > files > jobname 'Ds477_2202421', input './Ds477_2202421', resu lt 'Ds477_2202421' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > C:/$~1da/PODNIK/ConTeXt/Ds477_2202421.tex open source > 3 > 4 > c:/1da/tex/context/ctx_sml_library.tex colors > 'rgb' color space is supported colors > 'cmyk' color space is supported resolvers > modules > 'visual' is loaded open source > 4 > 5 > C:/context/tex/texmf-context/tex/context/base/m-visual .mkiv loading > ConTeXt Tracking Macros / Visualization close source > 4 > 5 > C:/context/tex/texmf-context/tex/context/base/m-visual .mkiv setup > error in line 14, namespace 'itemgroup', instance 'itemize', k ey 'n' setup > error in line 14, namespace 'itemgroup', instance 'itemize', k ey 'packed'

some kind of error in your \setupitemize command

...

close source > 3 > 5 > c:/1da/tex/context/ctx_sml_library.tex close source > 2 > 5 > C:/$~1da/PODNIK/ConTeXt/Ds477_2202421.tex close source > 1 > 5 > C:/context/tex/texmf-context/tex/context/base/cont-yes .mkiv

*

a missing { or } ?

we need a real minimal example to see what is happening

Hans

----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

Hello.... Thanx Hans for the advice - too me it could attack itself :-). When I use \tracingall, then I managed to figure out what the problem was. In fact, there was an error retrieving data from an external file (the library), and it while trying to load ConTeXt buffer command. The original content of this buffer was: \startbuffer[hlavička_kú]% {\bf Katastrálnímu úřadu pro \VART{SMLOUVA}{KU_kraj} kraj\br% \expdoifelse{\getvariable{SMLOUVA}{KU_sidlo}}{\empty}{}{se sídlem \VART{SMLOUVA}{KU_sidlo}\br}% Katastrálnímu pracovišti \VART{SMLOUVA}{KU_pracoviste}}% \stopbuffer% This content has caused the error in the latest version of ConTeXt standalone (but in past versions of ConTeXt or standalone version of TeXLive 2014, I did not noticed this error message). When I made ​​the following changes: \startbuffer[hlavička_kú]% \bgroup% \bf Katastrálnímu úřadu pro \VART{SMLOUVA}{KU_kraj} kraj\br% \expdoifelse{\getvariable{SMLOUVA}{KU_sidlo}}{\empty}{}{se sídlem \VART{SMLOUVA}{KU_sidlo}\br}% Katastrálnímu pracovišti \VART{SMLOUVA}{KU_pracoviste}% \egroup% \stopbuffer% then everything goes smoothly and everything is OK. Thanks very much for your help and assistance. I'm not sure if this irregularities those revelations this somehow help you. It is at least strange that ConTeXt version of TeXLive 2014 the code untroubled eat ...: -) ... Thanks again and have a lot of energy ... Jaroslav Hajtmar PS: Just to explain the code of \VART macro (probably irrelevant to You): \def\random#1#2{ \startluacode local cislo=math.random(10) if cislo > 3 then context('\\getvariable{#1}{#2}') else context('\\fakenwords{1}{'..math.random(10,15)..'}') end \stopluacode } \def\VART#1#2{% \doifmodeelse{koncept}% { \doifmodeelse{security}% {\random{#1}{#2}} {% \expdoifelse{\getvariable{#1}{#2}}{}{{\ERRORSCOLOR #1.#2 ERROR}}{{\VARSCOLOR\getvariable{#1}{#2}}}%\removeunwantedspaces} }% } {% \expdoifelse{\getvariable{#1}{#2}}{}{{\ERRORSCOLOR #1.#2 ERROR}}{{\VARSCOLOR\getvariable{#1}{#2}}}%\removeunwantedspaces }% }% Dne 19.10.2014 10:49, Hans Hagen napsal(a):

On 10/18/2014 9:20 PM, Jaroslav Hajtmar wrote:

...

Thanx Hans for reply. A few hours I was looking for a problem in my source file and library that load at the beginning of my file. It seems that the problem has nothing to do with the error message means that it has not nothing to do with the itemize environment nor setupitemize (nothing like this in the file does not resp. when sections of code to comment out these environments, so nothing changes). The problem probably is related to some a side effect, because in older versions of ConTeXt Standalone not appear (and does not appear in Context, which is included in the latest distribution TeXLive 2014).

In my library are very old pieces of code that I used many years ago in plainTEX in combination with ConTeXtovým code (including frequent use \setvariables). Unfortunately I was despite my great efforts failed to create a "reasonable" minimal example, so I'll probably have to wait some time until someone else runs into a similar problem and will be able to describe properly document and create a minimum sample example (already with me it happened several times and each time it finally was resolved).

just put a \tracingall someplace ... (bottom up) then you can see where it stops

----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

Thanx one more. Jaroslav Hajtmar Dne 20.10.2014 9:16, Hans Hagen napsal(a):

maybe some lookahead issue: you load a buffer and the preceding command sees the { which confuses it. Sometimes it hels to define macros as unexpanded:

\unexpanded\def\random#

\unexpanded\def\VART#1#2{%