- ntg-context - NTG Mailing Lists

[LMTX] fonts problem (again)
by kaddour kardio 23 Feb '21

23 Feb '21

Hi! Once again i'm unable to load my system's font which is working well with MKIV. i have followed the steps : export OSFONTDIR=~/.local/share/fonts:/usr/share/fonts:/usr/share/texmf/fonts/opentype/ mtxrun --generate mtx run --make mtxrun --script fonts --reload without success. This problem occurred to me since december 2020, i update LMTX weekly from the archlinux user repo (aur) binary. Any suggestions? -- Dr YAHYAOUI Mohamed Kaddour, cardiologue .

3 5

lmtx error: You can't use 'integer 340' in internal vertical mode
by juh 23 Feb '21

23 Feb '21

Hi, I can't yet provide a mwe as the project is quite complex and includes color profiles and bleed. I can process it with context. When I process it using lmtx but without colorprofiles and bleed, it works. When I process it using lmtx with colorprofiles and bleed, it get this error: tex error > tex error on line 1 in file ./prod-poster-motiv-souveraenitaet.tex: You can't use 'integer 340' in internal vertical mode <macro> \page_shipouts_arrange ...setbox \shipoutscratchbox \hpack {\getobject \??arrangedpage {\the \realpageno }}\fi \pusharrangedpage \shipoutscratchbox \deadcycles \zerocount \endgroup <macro> \page_boxes_shipout ...tbox \shipoutscratchbox \hpack {#1}\page_shipouts_handle {\finalizeshipoutbox \shipoutscratchbox \box \shipoutscratchbox } \fi \setnextrealpageno \the \everyaftershipout \ifcase \c_page_boxes_flush_n \else \page_boxes_flush_after \fi <macro> \page_otr_construct_and_shipout #1#2#3->\forgetall \page_boxes_shipout {\page_boxes_constructed_page #1#2} \page_otr_flush_pending_content \page_otr_check_for_pending_inserts \inpagebodytrue \pagebodymode \plusone \page_otr_command_flush_saved_floats \page_otr_command_set_vsize \str <macro> \currentcolorname \page_otr_command_side_float_output \ifconditional \c_page_sides_short \global \setfalse \c_page_sides_short \else \global \d_page_sides_vsize \d_page_sides_vsize_reset \global \c_page_sides_n_of_lines \zerocount \fi <macro> \currentcolorname \ifcsname \??otrtriggers \the \outputpenalty \endcsname \lastnamedcs \else \page_otr_command_routine \fi <output> {\inotrtrue \the \everybeforeoutput \page_otr_triggered_output_routine \relax \the \everyafteroutput } ... <line 3.47> \stopproduct Are there changes with modes or setupbackend in lmtx? My configuration is: \setupbackend[ format=PDF/X-3:2003, intent={ISO Coated v2 300\letterpercent\space (ECI)}, ] Ciao! Jan Ulrich Hasecke -- -- Autoren-Homepage: ......... http://literatur.hasecke.com Satiren & Essays: ......... http://www.sudelbuch.de Privater Blog: ............ http://www.hasecke.eu Netzliteratur-Projekt: .... http://www.generationenprojekt.de

3 9

\blackrule and margin
by Ursula Hermann 23 Feb '21

23 Feb '21

Dear List, i have the little following example: \setuppapersize[A8,landscape] \setuplayout[leftmargin=2.5cm, leftmargindistance=0.2cm, backspace=2.9cm, width=4cm] \showframe \starttext \blackrule \margintext{Me} \blackrule[color=black, height=0.5ex, width=1cm] \stoptext \startformula a^n + b^n = c^n. \stopformula \stoptext What i want is a\blackrule over the margintext, but i do not get what I wantend. Uschi

4 6

Questions for eTABLE
by Alain Delmotte 23 Feb '21

23 Feb '21

2 2

Using Gill Sans on macOS
by Gerben Wierda 22 Feb '21

22 Feb '21

I’m normall using Optima Nova on my system, e.g. by defining a font like this: \definefontfamily [archimate] [ss] [Optima nova LT Pro] [tf=style:Medium, bf=style:Bold, it=style:Medium Italic, bi=style:Bold Italic] \setupbodyfont[archimate] I would like to experiment with Gill Sans, but that fails with fonts > defining > unable to define 'GillSans.ttc' as 'archimate-14pt-ss-tf-0--0' It is here: /System/Library/Fonts/Supplemental/GillSans.ttc What should I do to be able to use that font? Gerben Wierda (LinkedIn <https://www.linkedin.com/in/gerbenwierda>) R&A Enterprise Architecture <https://ea.rna.nl/> (main site) Book: Chess and the Art of Enterprise Architecture <https://ea.rna.nl/the-book/> Book: Mastering ArchiMate <https://ea.rna.nl/the-book-edition-iii/>

2 2

path in LuaMetaFun
by Pablo Rodriguez 21 Feb '21

21 Feb '21

Dear list, I have the fowllowing sample: \starttext \startmakeup[page][align=middle] \startMPcode{doublefun} draw lmt_followtext [ text = "\feature[+][smallcaps]\bf\samplefile{zapf} ", path = ((0,0)..(3,3.25)..(9,-3.25)..(12,0)..(9,3.25)..(3,-3.25)..(0,0)), autoscaleup = "max", reverse=true, ] xsized .75TextWidth ; \stopMPcode \startMPcode{doublefun} draw lmt_followtext [ text = "\feature[+][smallcaps]\bf\samplefile{zapf} ", path = ((0,0)..(3,3.25)..(9,-3.25)..(12,0)..(9,3.25)..(3,-3.25)..cycle), autoscaleup = "max", reverse=true, ] xsized .75TextWidth ; \stopMPcode \stopmakeup \stoptext I’m afraid I don’t understand how to close the path. Cycle has problems with part of the text and returning to the start seems to distort the path itself. Which is the right way to close the path or what am I missing? Many thanks for your help, Pablo -- http://www.ousia.tk

2 4

metafun
by Hans Hagen 20 Feb '21

20 Feb '21

Hi, When making sure that the metafun manual processes with lmtx (where we have sometimes different implementations of macros) I also checked performance. When we started with this manual, it was still MKII time so we either had direct calls or inbetween calls. Especially multiple runs could take a while (many minutes, iir some 15 depending on how it was run). That was no fun. In mkiv with luatex and the built in mp library this dramatically went down to 18.1 seconds for one run and 14.2 seconds for luajittex, for 428 pages. This not bad considering that a lots of features are used: thousands of mp images, a bunch of external images, many fonts, plenty of buffers, positioning, color, hyperlinks, backgrounds etc. This document uses plenty of lua so that is why we gain a lot with luajittex. In lmtx where we dropped jit and have a less performing backend we expect to need more runtime but in the meantime we're quite okay. Not only the engine is faster, but also some low level macros benefit a bit from new features. I don't know how much lua speedup plays a role but probably not that much. For 448 pages (some 20 more than we had before) we now need 16.5 seconds and 15.7 when we use the compact font mode. So we're halfway between luatex and luajittex now. More than 3 seconds of the runtime is for metapost. (I use the machine as before.) Hans PS. If all the stories are true is should be 1 second on a modern apple at which point differences in measurements become noise but I cannot check that. Some day I might check it on a rpi 4. ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

2 2

Lua code and table
by Fabrice Couvreur 20 Feb '21

20 Feb '21

Hi, The code works, but is it possible to make it shorter ? Thank you Fabrice \startuseMPgraphic{DiagonalRule} rulethickness := \frameddimension{rulethickness}; drawoptions( withpen pencircle scaled rulethickness withcolor \MPcolor{\framedparameter{framecolor}}); pair leftcorner, rightcorner, Leftcorner, Rightcorner; leftcorner := (rulethickness, \overlayheight-rulethickness); rightcorner := (\overlaywidth-rulethickness, rulethickness); Leftcorner := ( rulethickness, rulethickness); Rightcorner := (\overlaywidth-rulethickness,\overlayheight-rulethickness); draw leftcorner -- rightcorner; draw Leftcorner -- Rightcorner; \stopuseMPgraphic \defineoverlay [DiagonalRule] [\useMPgraphic{DiagonalRule}] \define[2]\DiagonalLabel{% \setuptabulate [after={\blank[\frameddimension{offset}]}] \starttabulate [|p|r|] \NC \NC \bf #2 \NC\NR \NC \bf #1 \NC \NC\NR \stoptabulate } \starttext \startluacode local background_one = { align = "middle", style = "type", background = "DiagonalRule", } local letters_1 = { "A", "B", "C", "D", "E", "F", "G", "H" } context.startxtable({"align={middle,lohi}, width=0.8cm,offset=0.8ex,bodyfont=9pt,framecolor=cyan"}) context.startxrow() context.startxcell({"frame=off"}) context() context.stopxcell() for _, letter in ipairs(letters_1) do context.startxcell() context(letter) context.stopxcell() end context.stopxrow() for _, letter in ipairs(letters_1) do context.startxrow() context.startxcell() context(letter) context.stopxcell() for j = 0, 7 do context.startxcell( j == 0 and letter == "B" and background_one or j == 0 and letter == "C" and background_one or j == 0 and letter == "D" and background_one or j == 0 and letter == "G" and background_one or j == 0 and letter == "H" and background_one or j == 1 and letter == "A" and background_one or j == 1 and letter == "E" and background_one or j == 1 and letter == "F" and background_one or j == 1 and letter == "G" and background_one or j == 2 and letter == "A" and background_one or j == 2 and letter == "D" and background_one or j == 2 and letter == "F" and background_one or j == 2 and letter == "G" and background_one or j == 2 and letter == "H" and background_one or j == 3 and letter == "A" and background_one or j == 3 and letter == "C" and background_one or j == 3 and letter == "E" and background_one or j == 3 and letter == "H" and background_one or j == 4 and letter == "B" and background_one or j == 4 and letter == "D" and background_one or j == 4 and letter == "F" and background_one or j == 4 and letter == "G" and background_one or j == 5 and letter == "B" and background_one or j == 5 and letter == "C" and background_one or j == 5 and letter == "E" and background_one or j == 6 and letter == "A" and background_one or j == 6 and letter == "B" and background_one or j == 6 and letter == "C" and background_one or j == 6 and letter == "E" and background_one or j == 7 and letter == "A" and background_one or j == 7 and letter == "C" and background_one or j == 7 and letter == "D" and background_one ) context() context.stopxcell() end context.stopxrow() end context.stopxtable() \stopluacode \stoptext

6 13

issue with references
by Pablo Rodriguez 19 Feb '21

19 Feb '21

Hans, I have the following sample: \setuphead[chapter][sectionsegments=chapter] \setuphead[section][sectionsegments=section] \setupreferencestructureprefix [default] [prefixsegments=*:*] \starttext \startTEXpage[offset=1em] \chapter{Chapter} \section[sec]{Section} As told in \getreference[number][sec]. \getreference[title][sec].\\ As told in \in[sec]. \about[sec]. \stopTEXpage \stoptext \getreference[number] doesn’t follow \setupreferencestructureprefix. I don’t know whether this is intended, but I think it might be a bug. Many thanks for your help, Pablo -- http://www.ousia.tk

1 0

lmtx
by Hans Hagen 19 Feb '21

19 Feb '21

Hi, In the last couple of lmtx uploads \startTEXpage should work a bit better. These uploads also introduced a new option for alignments, which can be checked in: \def\DemoA#1{\vbox{\red \hsize#1\input tufte }} \def\DemoB#1{\vbox{\green \setupalign[always]\hsize#1\input tufte }} \def\DemoC#1{\startTEXpage[offset=10pt]\DemoA{#1pt}\blank\DemoB{#1pt}\blank#1pt\stopTEXpage} \starttext \dostepwiserecurse{300}{600}{10}{ \startTEXpage[offset=10pt] \startoverlay {\DemoA{#1pt}} {\DemoB{#1pt}} \stopoverlay \blank \the\dimexpr#1pt\relax \stopTEXpage } \DemoC{370} \DemoC{390} \DemoC{490} \DemoC{540} \DemoC{580} \stoptext I leave it to users to determine if the few cases where the results differ are better or worse but one can for instance use it to influence (as side effect) the last line. In general, tweaking the machinery can give different results and i guess that hardly any user can make consistent claims about what is better. It all depends on what one deals with. (The keyword is suboptimal, it kind of tells what happens but on the other obscurew what really goes on: always forcing a first hyphenation pass when breaking lines.) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

1 0