- ntg-context - NTG Mailing Lists

LMTX running on macOS Catalina; fuzzy paragraphs; unwanted whitespace
by T. Kurt Bond 23 Mar '20

23 Mar '20

I got LMTX running on macOS Catalina. I followed the directions here <https://wiki.contextgarden.net/Installing_ConTeXt_LMTX_on_MacOS> for versions prior to Catalina, including authorizing the mtxrun script through Security & Privacy General tab. The first run of install.sh stopped with the errors: cp: cannot stat '/Users/tkb/context-osx-64/tex/texmf-context/scripts/context/lua/mtxrun.lua': No such file or directory cp: cannot stat '/Users/tkb/context-osx-64/tex/texmf-context/scripts/context/lua/mtx-install.lua': No such file or directory So I ran install.sh again. This time it said a bunch of things were missing and downloaded them. It seemed to finish ok, so I ran context on my document and it produced a PDF! (The ConTexT with TeXLive 2018 and TeXLive 2019 both died on this document with different unhelpful errors, by the way.) Both LMTX and TeXLive 2019 ran 5 to 10 times slower than TeXLive 2018, and both complain about "fuzzy paragraphs" with a list of U+XXXX codepoints. What's that mean? However, the PDF has unwanted whitespace in many areas. - It has unwanted whitespace between the entries in the Table of Contents. - It has unwanted whitespace before and after section headings, despite me having "before={},after={}" in the \setuphead commands for all the levels of sections. - And it had a large unwanted white space between paragraphs until I \setupwhitespace[none]. I'd prefer a little bit of white space between paragraphs, but I tried \setupwhitespace[0.5ex] and \definemeasure[between][0.25ex] with \setupwhitespace[\measure{between}], and \setupwhitespace[5pt] but all those went back to way too much white space between paragraphs. Any ideas? -- T. Kurt Bond, tkurtbond(a)gmail.com

2 4

Re: [NTG-context] startcombination place reference left of images instead below
by Wolfgang Schuster 23 Mar '20

23 Mar '20

Christoph Hintermüller schrieb am 23.03.2020 um 17:09: > Hi Wolfgang > > On Mon, 2020-03-23 at 15:56 +0100, Wolfgang Schuster wrote: >> This is not possible but maybe the following is a alternative for >> you. >> >> The tabulate can be used in combination with an item group to have >> auto >> generated numbers in a given column. >> >> \starttext >> >> \startitemize[a][stopper=)] >> \starttabulate >> \NI First entry \NC\NR >> \NI Second entry \NC\NR >> \NI Third entry \NC\NR >> \NI Fourth entry \NC\NR >> \stoptabulate >> \stopitemize >> >> \stoptext >> > I'm not sure if I'm doing something wrong or if I want something which > is not possible at all > > I tired to ammend your above example as follows > > \placetable[] > [fig:somefig] > {some caption} > { > \startuseMPgraphic{heap_add_start_with_3} > input images/heap; > \stopuseMPgraphic > \startitemize[a][stopper=)] > \starttabulate > \NI { \useMPgraphic{heap_add_start_with_3} } \NC\NR > \stoptabulate > \stopitemize > } > > But id do get an "Undefined control sequence" for the \stoptabulate > command. > > Is it cause i try to use \useMPgraphic inside tabulate column? or is it > something else. You have to provide a *working* minimal example because the following dummy graphic works. \starttext \startplacetable[title={some caption},reference={fig:somefig}] \startuseMPgraphic{heap_add_start_with_3} draw fullcircle scaled 4cm ; \stopuseMPgraphic \startitemize[a][stopper=)] \starttabulate \NI \useMPgraphic{heap_add_start_with_3} \NC\NR \stoptabulate \stopitemize \stopplacetable \stoptext Wolfgang

1 0

troubles with latin modern and mutool
by Damien Thiriet 23 Mar '20

23 Mar '20

As an addition to my mail. I tried poppler pdfseparate and pdfunite, but the resolution is too high and my extract is much eavier than the original file. As an alternative, Is there a way to compile just a part of a context file, keeping the whole toc? My college pupils will get lost if my 3) is changed to a 1) (don't whether this is only typicall for French pupils). Regards, Damien Thiriet

1 0

Re: [NTG-context] write a subtitle under the title of a chapter using outlined font
by Jeong Dal 21 Mar '20

21 Mar '20

Dear Hans, Your method perfectly works! The number of chapter use the same font as the main title font and there is no big space between main title and the subtitle. Thank you. Best regards, Dalyoung > > On 3/20/2020 11:07 AM, Jeong Dal wrote: >> Dear Hans, >> Here is another problem. >> To use a big font for the title and a small font for the subtitle, I set the font size in the \setuphead. >> Then it writes them fine in two lines, but a big linespace between them. >> If I remove the “style=\BigFontTwo” from the \setuphead, and use it in the title input like >> \startchapter[title={{\BigFontTwo A Long Long Title}\crlf{\tfa Sub Title}}] >> then a big space is gone, but the chapter number follows the size of subtitle. >> How to remove the big space while the chapter number follows the size of the title? > \tfd \setupinterlinespace Foo \par > \tfa \setupinterlinespace Bar \par

1 0

Indenting entries in the table of contents?
by T. Kurt Bond 21 Mar '20

21 Mar '20

I'd like subsection entries in the table of contents to be indented slightly, and subsubsection entries to be indented slightly more, and subsubsubsection entries to be indented some more. Is there any way to do this? -- T. Kurt Bond, tkurtbond(a)gmail.com

3 2

mtx-context | fatal error: return code: 11
by Gerben Wierda 20 Mar '20

20 Mar '20

What does mtx-context | fatal error: return code: 11 mean? G

1 0

write a subtitle under the title of a chapter using outlined font
by Jeong Dal 19 Mar '20

19 Mar '20

Hi, long time ago, I can use outlined fonts for the title of a chapter by the help of the experts in this list. Now, I’d like to write a subtitle under the title, but \crlf is not working. I tried in several ways, but I couldn’t make it. How to write them in two lines? Thanks. Best regards, Dalyoung ************** \startuseMPgraphic{outlineT} draw outlinetext.b (\MPvar{tt}) (withcolor .75white) (withcolor .725blue withpen pencircle scaled .75pt); \stopuseMPgraphic \define[1]\outlineFill{\useMPgraphic{outlineT}{tt="#1"}}% \setuphead[chapter,title] [textcommand=\outlineFill, color=.625Blue, numbercommand=\outlineFill, number=yes] \setupbodyfont[rm, 12pt] \starttext \startchapter[title={First Title\crlf{\tfa Sub Title}}] \input knuth \stopchapter \stoptext

2 3

Bug (Lua) ?
by Fabrice Couvreur 19 Mar '20

19 Mar '20

Hi, this file did not pose any problems but today yes. Thank you. Fabrice \starttext \startluacode local letters_1 = { "A", "B", "C", "D", "E", "F", "G", "H", "I", "J" } local letters_2 = { "1", "Année", "1998", "1999", "2000", "2001", "2002", "2003", "2004", "2005","2006" } context.startxtable({"align={middle,lohi}, width=1.2cm,offset=0.8ex,bodyfont=9pt"}) context.startxrow({"background=color,backgroundcolor=green"}) context.startxcell({"background=color,backgroundcolor=white,frame=off"}) context("") context.stopxcell() for _, letter in ipairs(letters_1) do context.startxcell() context(letter) context.stopxcell() end context.stopxrow() context.startxrow() for _, letter in ipairs(letters_2) do context.startxcell() context(letter) context.stopxcell() end context.stopxrow() context.startxrow() context.startxcell() context("2") context.stopxcell() context.startxcell({"width=2cm"}) context("Prix (kg)") context.stopxcell() for i=0,8 do context.startxcell() context("%0.5g",1.031^i) context.stopxcell() end context.stopxrow() context.stopxtable() \stopluacode \stoptext lua error > lua error on line 34 in file /home/viserion/Table.tex: [ctxlua]:5: unfinished string near '"align={middle,lohi},' 1 \starttext 2 \startluacode 3 local letters_1 = { "A", "B", "C", "D", "E", "F", "G", "H", "I", "J" } 4 local letters_2 = { "1", "Année", "1998", "1999", "2000", "2001", "2002", 5 "2003", "2004", "2005","2006" } 6 >> context.startxtable({"align={middle,lohi}, 7 width=1.2cm,offset=0.8ex,bodyfont=9pt"}) 8 9 context.startxrow({"background=color,backgroundcolor=green"}) 10 context.startxcell({"background=color,backgroundcolor=white,frame=off"}) 11 context("") 12 context.stopxcell() 13 for _, letter in ipairs(letters_1) do 14 context.startxcell() 15 context(letter) context.stopxcell() 16 end mtx-context | fatal error: return code: 256 TeX Output exited abnormally with code 1 at Thu Mar 19 11:15:49

5 5

Ignored spacings are ignored
by Henri Menke 18 Mar '20

18 Mar '20

Dear list, Sorry for the stupid title, I couldn't resist. :-) LuaTeX has the option to adjust spacing between different classes of math atoms. However, looking in the TeXbook, page 170, in the table for spacings between adjacent atoms, we find that some of those spacing are undefined (* in the table) and therefore, when TeX encounters this combination, spacing is just skipped. This also translates to the parameters in LuaTeX. For example the combination Open-Bin is skipped by TeX and therefore setting the corresponding parameter just does nothing. \Umathordrelspacing\textstyle=50mu \Umathopenbinspacing\textstyle=50mu $a = (-2)$ \bye So my question is, what is the point of the parameters that describe these skipped combinations? Shouldn't they just be deleted? Alternatively, they could actually be implemented to do something. More context: https://tex.stackexchange.com/questions/532758 Kind regards, Henri

2 3

Math font not embedded
by Jan Willem Flamma 18 Mar '20

18 Mar '20

4 5